Seat Pad, NSR250V
€67.02
Kit, Seat Set, GRP, (Street), MC21, MC28, NSR250V
Modelled closely from the seat cowling taken off an actual NSR500V HRC factory machine, this seat cowling kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but in proportion to the NSR250. This seat cowling set can be installed with both the MC28 and the MC21, (though to fit it on a MC21 you will need an MC28 fuel tank or TYGA Fuel tank BPCG-0001 or BPFG-0001). The set consists of the parts shown below and has a taillight for street use and special mounting hardware and seat pad provided.
We have designed the seat cowling so that for fuel tank removal, there is no need to remove the seat cowling, making for quick and easy jet changes and maintenance etc. Note, you do not need to change the subframe for either the MC21 or MC28 models to install this seat cowling which bolts to the stock subframe holes at the rear and special front lower subframe mounting positions with all hardware provided. The seat cowling has threaded holes in the underside to attach exhaust stays TYLY-0243L and TYLY-0243R for use with NSR250V exhaust system EXCS-0047
We recommend installing this seat cowling set with fairing set BPFS-0195 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPSP-0008
SKU: hon-11062 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Carbon seat cowling, RD250/350LC (4L1/4L0)
€207.19
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
Set exhausts side by side stainless steel “mirror” , Yamaha RD350LC (4LO)
€702.49
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
TYGA no: EXCS-0044
SKU: yam-10051 Categories: 2 stroke exhaust sets, ALL products, Exhausts, RD350LC 4L0, Shop, YamahaIgnition rotor (track only), Honda NSR250 MC21/MC28
€203.15
HRC style total loss ignition rotor for the NSR250 MC28.
Simply remove the standard rotor and generator system and fit this super light weight rotor.
Timing position is the same as standard MC28 rotor, but this can of course be adjusted by offset woodruff keys.
For use on NSR250 MC21 an offset woodruff key (2 degree advanced) must be used.
Please note that this rotor is for racing only and cannot be used on the street. It’s use requires that the battery be fully charged and in tip top condition as the charging system is removed and performance relies solely on the battery condition.
TYGA no: TPER-0040
SKU: hon-10382 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopSeat Panel, Left, Ebony, Ninja 250R 2008 -12
€55.10
Seat Panel, Left, Ebony, Ninja 250R 2008 -12
TYGA no: 36040-0114-H8
SKU: kaw-10201 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopExhaust set stainless steel, Honda NSR150
€346.46
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide, and we are now pleased to be able to offer their cylinder head for use on the NSR150SPThe VHM cylinder head is designed with removeable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (14.20cc)Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Tyga Step Kit Replacement Left Side Hanger, Aprilia RS-125, Assy.
€77.07
Replacement left hanger for your Aprilia RS-125 TYGA Step Kit. Complete with mounting hardware and bushes.
TYGA no: STAH-0021
SKU: apr-10091 Categories: ALL products, CNC parts, CNC parts, RS125, Stock list, all modelsCarbon dash TYGA,, Aprilia RS250
€33.12
This carbon dash is made specifically for the TYGA bodywork kits (BPFS-0100 and BPFS-0101). Adds finishing touch to the fairing and hides wiring harness
Not suitable for the stock bodywork, see BPCX-9330.
TYGA no: BPCX-9230
SKU: apr-10074 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, Shop