Handlebar Clamp, Left, Black, CBR250R
€92.83
Replacement left handlebar clamp for handlebar set TYLY-1469
Lower Triple Clamp, CNC Black, CBR600RR Forks/NC30 Shaft
€367.66
Lower Triple Clamp, CNC Black, CBR600RR Forks/NC30 Shaft
CNC machined TYGA lower triple clamp for the VFR400R/NC30 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-MR7-003
Bearings: 91016-MR7-003
This product is also sold as part of a set
TYLY-1944 Triple Clamp Set, CNC Black, CBR600RR Forks to fit NC30.
Water Hose, NSR250 MC21/28
€16.87
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: 19506-KV3-830
SKU: hon-11243-1 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsRacing step kit CNC silver, Honda NSR250 MC28
€383.61
TYGA Performance racing step kit assembly. Designed in-house by TYGA Performance using AutoCAD software, these CNC machine- made step kits are made from top quality, aircraft grade aluminium. Features levers moving on ball bearings to give precise and smooth movement, and comes complete, ready to bolt on with stainless steel fasteners. One of the many advantages over the standard footrest assembly is the ability to reverse the shift pattern without removal of the side stand, so giving the ‘racer’ set-up, on the street. Kit includes gear selector link rod.
Peg position is 27 mm up and 20 mm. back. Pitch of hanger to frame mounting holes is 76.4 mm on left and 70 mm. on right.
Gear link rod provided
Note, MC21 step kit differs from the MC28 version only by using hanger STAA-0002A for MC21 instead of STAA-0002 for MC28 due to different rear brake master cylinders. Left sides are indentical as are all other parts.
Reverse schifting is possible with this race step kit.
TYGA no: STAA-0002b
SKU: hon-10254b Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC28, ShopCarbon airbox lid, Honda NSR250 MC16/MC18
€232.17
Race Air Box Lid (Carbon) MC16, MC18
The stock air box is restricted by the size of the inlet holes on the lid which limits the amount of power that can be unleashed from the NSR250. By replacing the stock air box lid with the TYGA Performance version, the inlet to the air box is more than doubled in size and the flow improved by having one large trumpet.
This product is a direct replacement for the stock one and uses all the stock hardware. It even has groove so a perfect seal with the air box can be retained. A mesh is supplied in the air box to hold the stock air filter securely in position.
As well as potential power improvements over the stock air box, there is no denying it certainly looks a lot more trick than the Honda one too!
TYGA no: BPCX-9110
SKU: hon-10624 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR250 MC18, ShopCarbon fly screen, Honda MSX125SF Grom 2nd
€54.22
Fly Screen, (Carbon), MSX125SF Grom
Carbon fiber flyscreen. Fits in minutes by means of double sided tape provided. Treat your bike and make your bike stand out from the crowd!
TYGA no: BPCX-7728
SKU: MSX-10357 Categories: ALL products, Bodywork and carbon, Honda, MSX125SF 2016 -2020, ShopTop triple clamp nut M24x1, NSR/RFV/CBR250/400
€18.03
Top clamp nut machined from 6061 T6 aluminium. Light weight and good looking. Clear anodised for a long lasting finish.
This nut is a direct replacement to the top nut on many Honda machines, such as MC18~28, RVF400, NSR150SP, CBR250/400, CBR900. The list is long.
The thread is M24x1
Torque setting: 65Nm
TYGA no: TYLY-0027
SKU: hon-10288 Categories: ALL products, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, CNC parts, Honda, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, Various parts, Various parts, Various parts, Various parts, Various partsExhaustset race Stainless steel carbon Silencer round w cap, NC30 NC35
€1,251.76
TYGA stainless steel racing exhaust, the best set available in the market
Exhaustset race Stainless steel, carbon silencers oval w cap, NC30 NC35 (hon-10302)
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inchinternal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
The pipe set is supplied with a round carbon silencer EXSL-0112 which is held in place by springs for ease of fitment and removal. This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0026
SKU: hon-10303 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30