Tank cover set, CBR250RR MC22
€239.46
This product is a set of two tank covers which are designed to fit over a stock MC22 CBR250RR tank to prevent or cover up accident damage to the tank for example. They use the original mounting points front and rear.
We recommend using a smear of silicone sealant where the two halves meet and round the filler cap for a secure and watertight seal
Top triple clamp CNC black, KTM RC390, 2022-
€222.31
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1273
SKU: ktm-10208 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsHandlebar set silver, Honda CBR250 2011 – CBR300 2014
€222.93
Handlebar Set, Black, CBR250R/CBR300R.
This CNC machined handlebar set is designed to change the handlebars to be up to 25 mm. lower from the stock position giving a more sporting riding position. The ergonomics work very well with our step kit STAA-0013 putting more weight over the front end for better control, while putting the rider’s upper body lower behind the fairing for better areodynamics and less fatigue at high speed riding.
Designed to match our triple clamp (TYLY-0069 and TYLY-1069), these handlebars give the finishing touch to the cockpit area and are available in two colours, black or silver.
TYGA no: TYLY-0469
SKU: hon-10185 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, CNC parts, CNC parts, CNC parts, Honda, ShopCarbon tank protectors MK2, Aprilia RS250
€90.01
Carbon tank protectors MK2, Aprilia RS250 (apr-10083)
Perfect for race but also road use, gives your bike that Gp look!
Product is of full carbon
TYGA no: 004401KT/P
SKU: apr-10083 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopVHM Cyl. Headset Honda NSR125
€311.95 €280.76
VHM Cyl. Headset Honda NSR125
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This head set comes with following parts:
1x cylinder head
1x standard insert (12,00cc)
Optional inserts:
– blind
– 11,80
– 12,20
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Note: please put in comment box, what size insert you want (no comment is STD insert).
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
This product is relatively new , please allow 2 weeks before shipping.
TYGA no: AA33173 - AE32284-E
SKU: alg-10309 Categories: ALL products, Honda, NSR125 JC22 1994 - 2003, Shop, VHM productsFork cap kit, Honda RVF400 NC35
€317.71
After 20 years or so of hard use, many NC35’s have damaged or scruffy fork caps. We know that it can really detract from an otherwise well restored bike if the fork caps are scuffed or dinged up. We therefore decided to reproduce the fork caps both for our collection and to offer to the public at the same time. CNC machined from 7075 T6 aluminium and brass and with the clear anodizing, just like the original OEM parts, these fork caps are the finishing touch of any NC35 restoration and install exactly the same as the original Honda ones.
The 3 legged Spring Adjuster Plate is not included in this kit. Please reuse the original part.
Removal and refitting of the original NC35 rebound damper rod is required, so please follow the instructions carefully.
TYGA no: TPER-0068
SKU: hon-10994 Categories: ALL products, CNC parts, Honda, RVF400RR NC35, Various partsCarbon rear hugger stock shape, Honda MSX125 2021-
€274.77
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCH-7048
SKU: msx-10477 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopSilencer, Stainless Moto Maggot, Left, KTM RC390 Serpent, No fittings
€205.51
Silencer, Stainless Moto Maggot, Left, KTM RC390 Serpent, No fittings
Maggot silencer with 35 mm. inside diameter. Does not include pipe section or springs
TYGA no: EXSL-8113L(p)
SKU: ktm-10122 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all models