Triple Clamp Set, CNC Black, NSR250, MC28
€619.36
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform! They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation.
The top clamp has the ‘bolt-on’ ignition switch holder fitted, which can be removed for racing. The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1641
SKU: hon-10872 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC28Silencer oval carbon, Honda MSX125 GROM
€329.98
Silencer, Carbon, Oval/Carbon End Cap, Spring Mount, MSX125 Grom, No Fittings
TYGA no: EXSL-0042p
SKU: MSX-10066 Categories: ALL products, Exhausts, Exhausts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopBelly Pan Race/street (GRP, white Paint), WSS300 TYGA version, KTM Duke125/200/390 2017-
€358.08
Step Kit (Street), (Adjustable), KTM 390 Duke
Designed in-house by TYGA Performance using the latest CAD/CAM software, these CNC machine-made step kits are made from top quality aircraft grade aluminium. Complete with carbon heelguard on left and right hanger.
Race shift possible by reversing the gear change arm. No other modification necessary other than adjustment of the link rod.
Peg position is 25/40mm. up and 15/30mm. back*.
Brake light is operated by standard pressure switch.
Provision for the side stand is provided.
Fitting the TYGA Step Kit for the KTM 390 Duke requires that the swingarm axle be removed from the machine, which can render the vehicle unstable. Having an assistant can be very useful during removal and fitting of the axle.
Washer, Waterpump Shaft, MC28
€4.31
Washer, Waterpump Shaft, MC28
TYGA no: 90405-KV3-000
SKU: hon-11128 Categories: ALL products, High performance, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Top end rebuild set Cylinder A, Honda NSR250 MC21/MC28
€293.88
The picture shows everything you need to do a top end rebuild on your MC21/28. One kit includes all parts for one cylinder (cylinder ‘A’). To overhaul both cylinders please order 2 kits.
Honda OEM:
1x Gasket cylinder 12192-KV3-680
1x Gasket head 12251-KV3-830
1x Piston ring 13010-KV3-305
1x Piston B mark 13102-KV3-830
1x Piston pin 13111-KV3-771
1x RC valve shaft E clip 90601-KV3-000
1x Bearing piston 91102-KV3-771
1x Seal, RC valve shaft 91201-PA9-004
2x Dowel cylinder 94301-10160
2x Piston Circlip 15mm 94601-15000
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0001A
SKU: hon-10439 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopCover headlight upper cowling (pair) paint, Honda VFR400 – RVF400
€35.34
Cover, (paint), pair, Headlight, Upper Cowling, Endurance
To be used on the TYGA Endurance Fairings for NC30/35
TYGA no: BPFC-9010paint
SKU: hon-10646 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, VFR400RR NC30Stud, C, MC28
€2.59
Stud, C, MC28
TYGA no: 90033-KV3-830
SKU: hon-11132 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Top triple clamp set CNC silver, Honda VTR1000 SP2
€327.34
CNC machined top triple clamp with detachable ignition switch/lock holder for your Honda SP2. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Fully functional steering lock.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp and key holder set offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.