Carbon chain guard, Honda CBR1000 2004-7
€148.02
This is a high quality carbon direct replacement part for the cheap looking plastic item supplied by Honda
Update your bike with this great carbon product, direct replacement of the original part
Seat cowling with carbon assy, Honda NSR250 MC28
€363.28
We now make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. This product includes ONLY the seat cowling for replacement in the event of an accident or to use on a model other than the MC21 or MC28. For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
Tyga Performance Compatible Parts for this Product:
This product should be used with:
TYLY-0007 Subframe
TYLY-0006 Battery Box
BPSP-0001A Seat Pad
BPAC-0001 Rear Brake Reservoir Kit,
And also as well as the above on street versions:
BPLT-0008 LED Taillight
BPFX-9006 Registration Plate Holder
TYGA no: BPFT-9012Â
SKU: hon-10347 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, NSR250 MC28, ShopCarbon fuel tank stay front, Suzuki RGV250 VJ21/VJ22
€60.24
Fuel Tank Stay, Front, Carbon, RGV250 VJ21/VJ22
This lightweight corrosion proof carbon stay replaces the stock item that the bike is supplied with.( Suzuki OE part nr: 44521-32C00-000.
It uses the stock mounting screws and can installed in seconds.
Fits Suzuki RGV250 VJ21 and VJ22
TYGA no: BPCC-0062
SKU: suz-10144 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, RGV250 VJ21, RGV250 VJ22, Shop, Suzuki, Various parts, Various partsAirbox GRP, A kit, Honda RS250 NX5
€480.84
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPFX-0008
SKU: hon-11312 Categories: ALL products, High performance, Honda, RS250R NF5 / NX5, Various partsHandle bar clamp pair ” hinge type” black, KTM RC390 2014 -25
€205.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1731
SKU: ktm-10214 Categories: ALL products, CNC parts, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsMeter Stay MC18, GP-T Assy
€75.27
Meter Stay MC18, GP-T Assy.
This stay replaces the stock Honda meter stay and allows for fitment of the upper fairing BPFU-9035, BPFU-9135 and BPCU-9035. Supplied complete with plastic bung for quick fairing assembly and removal.
TYGA no: TYLY-0154
SKU: hon-10729 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, NSR250 MC18Sprocket rear blank , Universal #520
€67.41
Sprocket, Rear , Blank #520, Aluminium, (Gold)
These blank #520 sprockets are designed with the custom builder/racer in mind.
Finding the correct sprockets for your special is never easy, so we’ve done the hard work for you. All that’s left to do is turn out the center and drill the mounting holes.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
We advise seeking the advice of an experienced machine shop for truing up the sprocket prior to machining the center bore and mounting holes to ensure perfect concentricity and bolt fitting.
Forged Aluminium Racing wheel set, 5 spoke, PVM, Front 3.50 x 17, Rear 5.5 x 17, Gold.
€1,859.00
Forged Aluminium Racing wheel set, 5 spoke, PVM, Front 3.50 x 17, Rear 5.5 x 17, Gold.
This racing wheel set has been designed specifically for the following model applications:
NX5 RS250R
RC30 VFR750R
RC45 RVF750
This exciting 5 spoke forged racing wheels set, has been exclusively developed by TYGA Performance and PVM to bring you the ultimate wheel combination for your motorcycle. PVM is a long established German wheel manufacturer, supplying motorcycle manufacturers such as BMW and racing teams in Moto GP such as Tech3 as well other series around the World. For this project, TYGA Performance reached out to PVM to supply a wheel specific to the requirements of the motorcycles we ride and love. The result are these beautiful and functional wheels you see on these pages.
Technical Features of PVM Forged Aluminium Wheels
Forged from AlMgSi1 aluminium
Crop-milled rim
100% quality control of forging process
Completely CNC-manufactured and thus virtually 100% free of imbalance and faults
Low unsprung weight and low rotating mass, drastically improving acceleration, braking and handling
More stable than conventional cast wheels
Far greater corrosion resistance compared to magnesium wheels, without increased mass.
Wheels come with all necessary bearings and hub spacers and valves
Specific details and features of the TYGA PVM wheels designed for MC28, NC30, NC35 application.
For the RVF400, VFR400 and MC28 NSR250: Please see set TWHL-0012
Fitment: They are a direct fitment for the models listed. The rears are specifically designed by us here at TYGA to fit the Honda street bike hubs without the need to modify or change the rear brake rotor mounting bolts and the fronts have the correct bearing spacing for Honda street bikes of that period, so no time wasted by the user adapting them to fit. Simply use together with the OEM wheel spacers.
Weight: Weight. These wheels are super light and suitable for racing. The front 3.50 weighs: 2.738 kg, the 5.00 rear weighs: 3.073 KG and the 5.50 weighs: 3.228 kg
Strength: These wheels are made from forged aluminium so super strong but much lighter than cast aluminium wheels They are stronger and less prone to corrosion and cracking than magnesium. See load chart below for details of maximum weights.
Peace of mind: They are brand new compared to most lightweight wheels available for these models which are mostly around 20 years old and therefore past their safe use date
Style: They look stylish and modern with the Y spoke design and the tough and elegant finish in gold, white and satin black give the perfect finishing touch to your motorcycle’s appearance.
Torque specs
Front Axle Nut: 60 Nm (43 ft-lb)
Rear Wheel Nut: 120 Nm (87 ft-lb)
TYGA no: TWHL-0013
SKU: alg-10302 Categories: ALL products, Honda, PVM Wheels, PVM wheels, RS250R NF5 / NX5, VFR750R RC30