Silencer stainless round, WSS300 (race) system, KTM RC390
€406.03
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0109
SKU: ktm-10200 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsset, pipe full race system "no silencer" RH exit, VFR750F gen 4, 94-97
€1,010.86
Set, Pipe, R.H Exit, Full Race System, VFR750F, Gen 4, ’94-’97 (No Silencer)
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system can be used with a number of our 2″ slip on exhaust silencers
See also our sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0134 Set, Pipe, R.H Exit, Full Race System, Oval Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: EXPS-0131
SKU: hon-11039 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Wheel Bearing Set, Rear MC18/21
€45.83
Replacement Rear wheel bearing. OEM quality assured
3x Bearings included
Also includes sprocket carrier bearing
TYGA no: TYPP-0010
SKU: hon-10834 Categories: ALL products, Honda, NSR250, NSR250 MC18, NSR250 MC21, Various parts, Various partsBrake switch spring holder
€2.45
Replacement left hanger for your TYGA Step Kit. Complete with mounting bolts and bushes.
TYGA no: BPSY-0089
SKU: hon-11528 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC21, NSR250 MC28, ShopLower Cowling, Race, GRP, KTM RC390 WSS300
€221.45
Lower Cowling, Race, GRP, KTM RC390 WSS300
Replacement Lower Cowling. WSS300, MUST be used with KTM WSS300 hardware
see also:
BPCL-7531U (Carbon Unpolished)
BPCL-7531 (Carbon Clearcoated)
Carbon/kevlar Airbox , Honda RS250 NX5
€520.00
Air Box, Carbon/Kevlar, RS250, NX5
This high quality carbon/Kevlar air box is a direct replacement for the stock HRC one (80101-NX5-770) It is supplied ready to install and includes the following actual HRC or equivalent TYGA aftermarket parts:
Ref Part Number Description Qty Req
1 55204-GJ2-000 GROMMET, OIL TUBE 2
2 64234-NX5-770 SEAL,GAP 3
3 80101-NX5-770 BOX,CARBRETOR (se) 1
4 80102-NX5-770 RUBBER,BOX SIDE 2
5 80108-NX5-770 FILTER,CARB BOX 1
7 90108-GK1-000 BOLT, FLANGE SH (6×12) 2
8 90652-ND5-000 TY-WRAP (2.4×92) 5
9 90654-NX5-770 STUD, FASTENER 35 1
10 90655-NX5-770 GROMMET, FASTENER 1
11 90656-NX5-770 SPRING,FASTENER 35 1
12 90754-NX5-770 STUD, FASTENER 30 (se) 1
13 90755-NX5-770 GROMMET, FASTENER 1
14 90756-NX5-770 SPRING, FASTENER 1
15 91082-NF5-000 RIVET, BLIND (2.4×5.7) 4
TYGA no: BPCX-0004
SKU: hon-10683 Categories: ALL products, Bodywork and carbon, By model, By product, Carbon, Honda, RS250R NF5 / NX5, Shop, Various partsLower cowlingstay left
€10.23
Lower left cowl stay set. Used with TYGA step kit STAA-0006.
TYGA no: BPSY-0074
SKU: apr-10030 Categories: ALL products, Aprilia, Bodykit replacement parts, CNC parts, RS250, ShopFairing set street RC211V TE3, NC35 kit
€910.45
The kit faithfully reproduces many of the 2006 model RC211V fairing features including front air ducts, side air duct design and full console joining up to the tank. Differs in headlight fitment from BPFS-0013.
This set of bodywork requires extensive modification of the NC35 including a tank cover, a meter stay for quick fastening of fairing upper and for the instruments to gain clearance with headlights and all the fitting hardware. It also includes a steering stopper to limit steering movement.
Comprises the parts shown below which are also available separately:
*A clear screen is provided unless you specify tinted in the comment box at check out
TYGA no: BPFS-0033
SKU: hon-10129 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, Shop