This Chain Adjuster/Rear Stand Bobbin Assy. for the CBR500 enables easy installation of a rear paddock stand for chain maintenance and use of tyre warmers etc. It also replaces the cheesy original chain adjusters allowing for ease of removal and fitment of the rear wheel. Unlike the original ones, which fall in a heap on the ground when you pull the rear wheel shaft out, these precision CNC machined adjusters will stay in place enabling the task to be easily completed by yourself.

Please note the bike is secure with the rear wheel removed, however, do not attempt to move the bike in this state.

Section, Left #1, KTM RC390 Serpent

Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22

CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.

Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-

Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.

See also BPFF-7142 for GRP version.

*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.

Replaces the heavy ugly fold away steel passenger peg assembly. These high quality cast aluminium replacements weigh approx. 50% of the original ones and are far more attractive. Particularly suitable for use with our Tyga seat cowling BPFS-0077 bodywork where the assemblies are on show.

Can be ordered with or without mounting lug for Tyga exhaust. (mounting lug not suitable for stock system)

Triple Clamp Set, CNC Black, NSR250, MC18, 1988/89

CNC machined TYGA triple clamp set for your NSR250 MC18 (1988/1889)

These stylish, all aluminium triple clamps are a direct replacement for the MC18 triple clamps, and with the help of FEA testing not only do they look fantastic, but they perform!

They are delivered ready to fit with all bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.

The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.

Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

TYGA Bike Dust Cover, Blue, Rothmans Honda

This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.

Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.

Mini LED turn signal lamps. Universal fitting. Bright but small and discrete, these units are easy to install requiring just one hole. Ideal for the finishing touch of any custom project. Please note that any LED turn signals draw a smaller current than most standard fitment ones and will need suitable flasher relay in order to flash at the correct speed.