Set full race system high level with stainless silencer with carbon cap, Honda MSX125SF GROM
€490.49
Set, Pipe, Full Race System, High Level, MSX125SF Grom, Stainless Oval/Carbon End Cap. Second Generation.
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Total weight of the set is 2300 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043)
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0065 Moto Maggot High level System for 2016 MSX125SF second generation Grom
EXPS-0066 Carbon Oval High level System for 2016 MSX125SF second generation Grom
Note: Some modification of the stock Honda rear hugger (no modification required if using the hugger BPCH-7028 and BPCH-7128) and stock Honda rear fender is necessary to install this system.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0067
SKU: MSX-10338 Categories: ALL products, Exhausts, Honda, MSX125SF 2016 -2020, ShopTriple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, CBR600RR forks to fit NC35
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3314
SKU: hon-11249 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, Stock list, all modelsWater Hose, NSR250 MC21/28
€16.87
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: 19508-KV3-830
SKU: hon-11243 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsTrottle cable B, Honda NSR250 MC21
€72.50
Trottle cable B, Honda NSR250 MC21
TYGA no: 17920-kv3-830
SKU: hon-10707 Categories: ALL products, Honda, Honda OEM products, NSR250, NSR250 MC21, Various partsLower Cowling, Rear, GRP, Special, RGV250 VJ23
€142.13
Chain Guard, Rear, Carbon, RGV250 VJ23
Fits: Suzuki RGV250 VJ23
Set full race system no silencer , Honda MSX125 GROM
€201.40
Set, Pipe, Full Race System, MSX125 Grom. No silencer. This product is fully compatible with the silencers used on our slip on systems for anyone looking to upgrade to a full system.
Designed for the MSX125 to maximise power, made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0043
SKU: MSX-10141 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, Shopfairing/meter stay, NC30 NC35
€61.75
This meter stay is to be used with our T10 and RC211V style bodywork set BPFS-0032 and BPFS-0092. It is compatible with BPFU-9217 which is supplied with a nylon insert which is first screwed into the upper into a threaded hole on the inside of the upper fairing. The other end of this nylon rod is then inserted into the tube at the front of the stay for quick installation and removal. This means you don’t need a front fixign point or an external bolt like most fairings have and the fairing is securely held in position by the meter stay and the other fixing points. This is particularly useful for race fairings when you need to remove the fairing quickly and easily.
TYGA no: TYLY-0031
SKU: hon-10081 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Carbon rear master break reservoir stay, RGV250 VJ21
€30.14
Rear Master Brake Reservoir Stay, Carbon, RGV250 VJ21
This lightweight corrosion proof carbon stay replaces the stock item that the bike is supplied with.
(Suzuki OE part nr: 69750-12C00-000).
TYGA no: BPCC-0060R
SKU: suz-10141 Categories: ALL products, Bodywork and carbon, RGV250 VJ21, Shop, Suzuki, Various parts