Exhaustset race Stainless steel double carbon Silencers, NC30 NC35
€1,421.35
This exhaust system includes everything you need to replace the stock system. It includes, stainless pipe work, twin carbon silencers, springs, gaskets, silencer clamp, mounting stay and all other mounting hardware.
This system can be used with stock Honda or Tyga bodywork/subframes
Dynograph shows totaly stock 35 compared to modded bike , twin stack tyga system, 1 layer race foam, short stacks, 125 mains front and rear, standard cdi.
TYGA no: EXPS-0003
SKU: hon-10105 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30NGK sparkplug BR9ECMIX, Suzuki RGV250 / Aprilia RS250
€22.00 €18.87
NGK’s Standard Plugs are Constructed for Longer Life and Optimum Performance.
TYGA no: NGKBR9CMIX
SKU: alg-10166 Categories: ALL products, Aprilia, High performance, High performance, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Various partsClamp, Emission Canister, Yamaha R25/R3
€41.53
Clamp, Emission Canister, Yamaha YZF-R25 and YZF-R3
Used with EXPS-0072 EXPS-0073 and EXPS-0074
Relocates the emission canister for exhaust header pipe clearance.
Exhaust Chamber, Left, Side By Side Type, Stainless Steel, RGV250 VJ22
€320.38
Bare replacement left side chamber for EXCS-0009L
Airbox Carbon/kevlar, Honda NSR250 MC21/MC28
€635.04
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPCX-0007
SKU: hon-11071 Categories: ALL products, Bodywork and carbon, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28lower cowling stock shape, Honda RFV400 NC35
€161.36
Street one piece lower cowling with open bottom as stock. Direct replacement for OEM Honda lower left, right and inner cowls. Can be used with most of our range of upper cowlings.
TYGA no: BPFL-0103
SKU: hon-10709 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Fairingenset race style RVF, NC30
€667.52
This kit comprises of parts shown below. The fairing is exact as NC35* and the seat cowling is model specific to the NC30 but in the same shape as the NC35.
Ideal for race classes where retaining stock shape (or similar) is necessary to comply with rules. The panels are top quality, being lightweight, flexible and tough. Constructed with epoxy resin and multi layer cross weave mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!
Please state if you would like a tinted screen or stock shape open lowers (BPFL-0003) and we will be happy to change to suit. The fairing will need a simple stay to locate front position.
Please note that the fairings only weigh approx. 1kg for each fairing panel and 2 kg for seat cowling. To ensure a safe delivery, the box they are sent in weighs 4 kg. You may want to consider two sets and save on shipping…
*Because the fairing is an exact copy fo the NC35 one, it is necessary to modify the NC30 front and upper stays to fit the positions on the NC35 panel.
TYGA no: BPFS-0042
SKU: hon-10075 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Top Triple Clamp, CNC Black, NC35 RVF400
€196.92
Top Triple Clamp, CNC Black, NC35 RVF400
CNC machined TYGA top triple clamp with detachable key holder for your RVF400 NC35
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
This product can be bought as a set TYLY-1042 with detachable ignition switch holder TYLY-1142.
TYGA no: TYLY-1042(p)
SKU: hon-10783 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, Stock list, all models