Registration/License Plate Holder, (Carbon), T13 Assy.
€136.75
This product is made using carbon fiber and holds the registration/license plate for use with our T13 seat cowlings. It is supplied with a registration/license plate illumination light for countries where this is a legal requirement. We also offer the same product but using only GRP, see BPFX-9118
This product attches by means of two bolts on an angled back flat plate and could be adpted to be used with other models with a flat undersurface.
TYGA no: BPCX-9118
SKU: hon-10823 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Airbox "GRP", Honda NSR250 MC21/MC28
€423.04
Airbox, GRP, NSR250 MC21/MC28
This high quality GRP air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and GRP for light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank
See also BPCX-0007 for the same airbox in carbon/kevlar
*please do note some product photos are for reference and show the Carbon/Kevlar version fitted on our NSR250 project bike
TYGA no: BPFX-0007
SKU: hon-11070 Categories: ALL products, Bodywork and carbon, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Engine stand, Aprilia RS250/Suzuki RGV250
€81.09
Engine stand for Aprilia RS-250 and RGV250, (VJ21 and VJ22 models).
No more chasing the engine around the bench as this stand allows for dual positioning so that whichever cylinder is being serviced is always easily accessible from the top.
Also rather handy for draining oil on a loose engine, or just neat storage.
Uses standard engine rubbers in engine mounts and is held in the stand with the standard engine mount bolts.
Zinc plated steel for corrosion resistance and good looks. A necessity for any RGV250 or RS250 engine builder!
TYGA no: TYTO-0029
SKU: alg-10124 Categories: ALL products, Aprilia, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Universal parts, Various parts, Various parts, Various partsCrankshaft Bearing, A, NSR250 MC18/21/28
€106.55
Crankshaft Bearing, Left, NSR250 MC21/28
Genuine OEM KOYO main crankshaft bearing for your Honda NSR250 MC21/28.
See also TYPP-0012SET for set consisting of one each of the left, centre and right crank bearings.
TYGA no: TYPP-0012A
SKU: hon-10757 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various partsMount stay, VFR750F gen 4, 94-97
€14.94
Mount stay, VFR750F gen 4, 94-97
Mount stay, VFR750F used on:
EXPS-0119 Set, Pipe, Full Race System, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
TYGA no: EXMS-0119
SKU: hon-11032 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Bracket rear brake CNC silver 84mm Brembo, Suzuki RGV250 VJ23
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, Silver, VJ22 and VJ23.
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1090)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
Carbon air duct T13, Honda RVF400 NC35
€123.60
This air duct is a direct replacement for the carbon version which is supplied with our T13 style fairings BPCU-9218 and BPFU-9218
TYGA no: BPCX-9208
SKU: hon-10317 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopSub-frame aluminium, Suzuki RGV250 VJ21
€177.07
Subframe, Aluminium, RGV250 VJ21, Assy
This lightweight aluminium subframe replaces the heavy steel scaffolding that Suzuki saw fit to inflict on the VJ21 and is idea for a race or modified street bike. The VJ21 is a light and agile bike and it is a pity that it is encumbered with all this weight at the rear of the bike which becomes redundant once you convert to single seat. All that is really needed is a lightweight subframe to support:
The rear fender
Taillight
Attachment for the radiator surge tank.*
* The surge tank is now accessed from the inside without the need to remove the race seat cowling should any top up be required. Alternatively, an aftermarket surge tank such as this can be installed (BPAC-1002)
With a single seat cowling, access to the autolube reservoir is hindered so we simplified the subframe so:
No passenger seat support area
No passenger pegs and mounting hangers
No autolube reservoir and mounting hardware.
No exhaust silencer mounts
Note that we are in the process of making an alternative suitable autolube reservoir kit and exhaust silencer mounting stays.
This product is made in-house in TYGA and all hand fabricated and precision welded for a race inspired and lightweight product, finished in high quality satin black powercoating and Includes all mounting hardware to mount subframe and undertray. The difference in weight is 0.54kg compared to 2.1kg for the stock one, so a whopping 1.56kg lighter!
Optional products which can be used in combination with this subframe
BPSY-0276 Mudflap
TYLY-0251 Coolant Reservoir Fitting Kit
TYGA no: TYLY-0248
SKU: suz-10151 Categories: ALL products, Bodywork and carbon, RGV250 VJ21, Shop, Suzuki, Various parts