Upper cowling race, Suzuki RGV 250 Tyga, assy
€224.26
This upper cowling is to be used in our VJ22 kit BPFS-0061.
This product is compatible with lower cowling BPFL-0026. Will not fit stock Suzuki lower cowling
TYGA no: BPFU-9126
SKU: suz-10073 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiSide cover right Red, Honda MSX125 GROM
€39.31
Side cover right Valentine Red, OEM Honda part
TYGA no: 83530-K26-900ZB
SKU: MSX-10118 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCarbon race airbox, Suzuki RGV250 VJ22
€496.10 €412.40
Carbon race airbox, Suzuki RGV250 VJ22 (suz-10098)
Our race airbox is inspired by the GP road racing technology, taking advantage of a front air intake and all available space within the engine compartment.
And by using the lower part of the fuel tank as closing to increase the volumetric capacity of which becomes 9.5 lt against 6.2 lt of the standard component ( 53%).
The air intake (Snorkel) is positioned in the front to be able to suck a greater amount of air and with less turbulence than the positioning adopted in origin ( in the back)
Its shape also was designed using the calculation FEM (Finite Element Method) to minimize the load losses and therefore increase performance in the complete range of the RPM.
The kit also includes a carbon cover to be mounted close to the air intake to prevent suction of hot air.
All this is mainly reflected in an increase in engine performance, as shown below on the Dyno graph.
Greater maximum power ( 3 hp *)
Better throttle response
Higher max. RPM ( 500 rpm)
A GP “sound”
Improved access for maintenance
jet #310 – #320 (*)
Also be using Carbon you will have weight reduction of around 50% (465 grams compared to 970 grams OEM).
The filter is washable and gives better performance then original
* Standard engine
Please note, the rubber airbox manifolds are not with the airbox. You have the reuse the original ones.
TYGA no: special015
SKU: suz-10098 Categories: ALL products, High performance, High performance, RGV250 VJ22, Shop, SuzukiFront fender (grp) stock shape, Honda RS250R NXA
€80.91
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Carbon stay L lower cowl, Honda CBR250RR MC22
€39.27
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPCC-7320
SKU: hon-11466 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersCarbon upper cowling street with air duct, Aprilia RS250 Tyga, assy
€726.62
This upper cowling is to be used in our Aprilia RS-250 kits, BPFS-0100 and BPFS-1100
This product is compatible with lower cowling BPFL-9030 and BPCL-9030. Will not fit stock Aprilia lower cowling
TYGA no: BPCU-9030
SKU: apr-10070 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, ShopCarbon Tail tidy TYGA , Honda MSX125SF GROM
€278.67
Splash Guard, (Plastic), MSX125 Grom
Easy to install, prevents road debris and water flicking up on the rear of your bike and looks way cool!
TYGA no: BPCX-9732
SKU: MSX-10472 Categories: ALL products, Bodywork and carbon, Honda, MSX125SF 2016 -2020, Shop, Various partsFront Fender white, Honda MSX125 GROM
€88.02
Front Fender MSX125 Grom, White
TYGA no: 61100-K26-900ZC
SKU: MSX-10099 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop