Ignition Switch Holder, CNC Silver, NC35 RVF400
€121.39
Ignition Switch Holder, CNC Silver, NC35 RVF400
This is a removable ignition switch/lock holder for our Honda NC35 RVF400 top triple clamps. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps TYLY-0042, TYLY-0242 and TYLY-0742.
TYGA no: TYLY-0142
SKU: hon-10782 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35Seat cowling assy, Honda NSR250 MC28
€213.43
We now make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. This product includes ONLY the seat cowling for replacement in the event of an accident or to use on a model other than the MC21 or MC28. For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
Tyga Performance Compatible Parts for this Product:
This product should be used with:
TYLY-0007 Subframe
TYLY-0006 Battery Box
BPSP-0001A Seat Pad
BPAC-0001 Rear Brake Reservoir Kit,
And also as well as the above on street versions:
BPLT-0008 LED Taillight
BPFX-9006 Registration Plate Holder
TYGA no: BPFT-9112
SKU: hon-10301 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, NSR250 MC28, ShopBracket front brake CNC black 40mm Brembo, Yamaha R25/ R3
€51.61
Bracket, Front Brake, 40 mm Brembo Conversion, Black, Yamaha R25/R3
CNC machined brake caliper support for your Yamaha R25/R3.
Designed and machined in house. Crafted from 6061 T6 aluminium, this caliper support allows you to fit a Brembo Goldline P4 30/34 caliper (40mm mounting pitch) to your R25/R3.
Tried and tested with the standard master cylinder and standard brake lines with great performance.
For race or track day use we recommend upgrading your master cylinder for ultimate stopping power.
Set, pipe full race system round aluminium silencer LH exit, VFR750F gen 4, 94-97
€1,107.23
Set, pipe full race system round aluminium silencer, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system can be used with a number of our 2″ slip on exhaust silencers
See also our sets with silencer included:
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand, however, the centre stand and pillion foot rests must be removed prior to installation.
TYGA no: EXPS-0124
SKU: hon-11017 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Handlebar set black, Honda CBR250 2011 – CBR300 2014
€222.93
Handlebar Set, Black, CBR250R/CBR300R.
This CNC machined handlebar set is designed to change the handlebars to be up to 25 mm. lower from the stock position giving a more sporting riding position. The ergonomics work very well with our step kit STAA-0013 putting more weight over the front end for better control, while putting the rider’s upper body lower behind the fairing for better areodynamics and less fatigue at high speed riding.
Designed to match our triple clamp (TYLY-0069 and TYLY-1069), these handlebars give the finishing touch to the cockpit area and are available in two colours, black or silver.
TYGA no: TYLY-1469
SKU: hon-10184 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, CNC parts, CNC parts, CNC parts, Honda, ShopFork gear shift no.2, RGV250/RS250
€82.24
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Lower Cowling (Carbon), NC35, T13, Assy.
€566.16
This lower cowling is part of a set of bodywork BPFS-0116.
TYGA no: BPCL-9218
SKU: hon-10806 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Set, pipe full race system round carbon silencer RH exit, VFR750F gen 4, 94-97
€1,373.19
Set, pipe full race system round carbon silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: EXPS-0135
SKU: hon-11043 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97 Tag: Exhaust systems