Carbon race airbox, NC30 NC35
€159.63
Perfect carburation requires a large volume of still air which most airboxes struggle to achieve.
Our race airbox increases this volume by 8% for more stable performance.
Great product for road but also on track!
TYGA no: BPCX-9009
SKU: hon-10117 Categories: ALL products, High performance, High performance, High performance, Honda, RVF400RR NC35, Shop, VFR400RR NC30Kit, Bodywork, GRP, stock shape, with Carbon tank, NSR250 MC28, Painted Rothmans
€3,430.87
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFS-0186
SKU: hon-10968 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersSet pipe, Full race with oval carbon silencer NEW, Kawasaki ZXR250 2013 –
€769.95
2013-2017, Set, Pipe, Full Race System, Ninja 250R, Carbon Oval Silencer
We have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 250 when used with the TYGA system*. Made in stainless steel with spring mounted Carbon Oval silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with an Carbon oval silencer EXSL-0043
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0015.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 250 Exhaust pipe sections and silencers.
TYGA no: EXPS-0078
SKU: kaw-10061 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -Silencer stainless steel Motogp style (4 stroke) 43mm maggot
€194.80
Maggot silencer with 43 mm. inside diameter. Same dimensions as Ninja 250/300 model but without mounting lug. Includes silencer clamp, mounting springs and spring hooks to weld on existing exhaust system tail pipe.
Tyga Moto Maggots are now available in five sizes, Mini, Midi, Moto, and Monster Mega Monster with inlet sizes of 35 mm., 43 mm., 50.8 mm., 54 mm and 64mm. respectively. As well as the basic five sizes, we have listed here some of the model specific Maggots which have lugs welded to them to suit their specific application.Of course, these can be mounted to other exhausts and offer an alternative to the basic Maggots.
All the silencers shown here are supplied with springs, spring hooks, and where applicable, mounting clamps.
 
<a title= Maggot 43mm href= {{media url= wysiwyg/02-maggot-exsl-4013-43mm-eaf5c71d.PDF }} target= _self >Click here for PDF</a>
&nbsp;
&nbsp;
&nbsp;
Carb Service Kit B, 19 pieces, Honda CBR400RR NC29
€31.32
Carb Service Kit B, 19 pieces, Honda CBR400RR NC29
LiteTek Carburettor Seal Kit to suit
Honda CBR400RR NC29
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x OR-019 Vacuum O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No.16040-MN4-003 superseded by 16040-MM5-601)
6x OR-016 Fuel O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-MN4-000)
4x OR-014 Float Breather O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No.16040-MN4-003 superseded by 16040-MM5-601)
4x CS-005 Choke PLunger Cap, Material: HNBR, (Part of Honda Assembly Part No. 16046-KT8-003)
3x SC-008 Throttle Synch Screws, Material: Stainless Steel
Please also see Honda CBR400RR NC29 Carb Service Kit A, 20 pieces.
TYGA no: CKB-Honda-NC29
SKU: alg-10355 Categories: ALL products, Carburettor Service Kits,, CBR400RR NC29, HondaSection, Secondary A, R.H Exit, VFR750F, 3rd Gen, 90-93
€107.88
TYGA no: EXPT-7151
SKU: hon-11344 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Set exhaust, race system double stainless oval/carbon cap , KTM RC390 2014 – ’21
€1,107.21
Set, Pipe, Race System, RC390, Stainless Oval/Carbon End Cap.Update your bike with this great TYGA performance, KTM power part!!Model 2017This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage. The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with decibel killers for noise reduction.CompatiblityThis exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.Please also see EXPS-0092 for similar system qith Moto Maggot silencers.CustomizationFeel free to request this product with no TYGA logo. we understand not everyone wants their bike to be covered with graphcs and won’t be offended. Simply put in the comment box with your order: ‘Please supply with no TYGA logo’. Just let us know your requirements; we want to provide the best possible product for your applicationPerformance and DynographPlease refer to dynographA) All Standard.B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition mapC) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition mapVery useful gains especially in the mid range for both B) and C), for much stronger acceleration.The silencer was full bore. No decibel killer used.NEW! for the 2017 model we added the EXPT-0003:Header exhaust, designed for unimpeded flow. Unlike the stock KTM header for the RC390, which has creases and dents to fit between the frame and engine, the TYGA header has been carefully fabricated to retain the round cross sectional area throughout, to avoid turbulent gas flow. Complete with Lambda sensor bung in the original position.Compatible with the following exhausts:Compatible with 2014-2016 KTM stock exhaust and other systems using the stock KTM header for those years.Compatible with 2014-2016 TYGA exhaust systems EXPS-0061 and EXPS-0062Included with 2017 on TYGA exhaust systems EXPS-0091 and EXPS-0092<iframe width= 560 height= 315 src= https://www.youtube.com/embed/tqJjURpXnaU frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0091
SKU: ktm-10093 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopRear sprocket aluminium gold, VFR400 / RVF400
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0201-38T - TYSR-0201-42TÂ
SKU: hon-10349 - hon-10353 Categories: ALL products, By product, Honda, Sprockets, Sprockets, Sprockets