Gear change pedal assy, Honda MSX125 GROM
€37.09
Pedal Assy. Gear, MSX125 Grom
TYGA no: 24700-K26-900
SKU: MSX-10103 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopNGK plugcab for sparkplug R7282 Blue
€67.95
NGK sparkplug cab for sparkplug R7282 Blue (alg-10228)
NGK spark plug cap TRS1225 with 5 kohm resistor for NGK short race spark plug R7282. Suitable for 8 mm spark plug cable. Can be used f.e. for Honda NSR250 / RS and Aprilia RS250 / Suzuku RGV250 Yamaha TZ 125 and 250 road race engines.
You also need product alg-10227, picture below is a complete set.
TYGA no: TRS1225
SKU: alg-10228 Categories: ALL products, Aprilia, High performance, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RS250, ShopSilencer clamp single 60mm offset
€11.78
This single silencer clamp is specifically designed for TYGA side by side expansion chambers for the Honda MC18, and Suzuki RGV250
Designed to securely clamp 60~61mm O.D. silencers.
Also for use with TYGA Suzuki RGV250 bodywork.
Fabricated in 304 Stainless Steel with Molded rubber for secure, yet safe clamping.
Compatible with the following TYGA systems:
EXCS-0003
EXCS-0005
EXCS-0007
EXCS-0009
EXCS-0014
EXCS-0016
EXCS-0026
EXCS-0027
Please note that the correct clamp is provided when you purchase any complete expansion chamber system with silencers. You do not need to order separately.
TYGA no: EXCL-0009
SKU: alg-10023 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Exhausts, NSR250 MC18, RGV250 VJ21, RGV250 VJ22, ShopKit, Fairing Set (GRP), Honda NX5 RS250R (ram air)
€908.45
Kit, Fairing Set (GRP), Honda NX5 RS250R
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (BPFU-9036)
The upper fairing is modelled off the last version of the NX5 RS250R but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (BPFT-9036)
Although the late model stock shape NX5 RS250R works well, to our eyes it is a bit lacking in lines and we prefer the 1995 factory NSR racer look as ridden by Ukawa and Okada. We therefore decided to make a similar style seat cowling which would be a direct fit for the NX5. The seat uses a lightweight aluminium stay to relocate the rear mounting bolts from the sides to the seat pad area and is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Stay NX5 RS250R (BPSY-0213)
Screen Clear NX5 RS250R (SCRE-0168)
TYGA no: BPFS-0172
SKU: hon-10904 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopFuel Tank, GRP, HONDA VFR750R RC30
€977.66
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Top triple clamp silver, CBR250 2011 –
€187.52
CNC machined TYGA top triple clamp (without detachable key holder for race use) for your CBR250R and CBR300R
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch holder can be ordered separately or together with this product as set TYLY-00069
TYGA no: TYLY-0069(p)
SKU: hon-10190 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, CNC parts, CNC parts, CNC parts, Honda, ShopCarbon tank cover, Honda CBR125/CBR150 2007-10
€98.58
Stock shape. Replaces original cheap nasty plastic cover on latest generation CBR125 (2007 on). This real carbon tank cover makes a huge improvement to the overall appearance and quality of the CBR.
TYGA no: BPCX-7018
SKU: hon-10274 Categories: ALL products, Carbon, CBR125R/CBR150R 2004-10, Honda, ShopComplete fairing set T9, Honda CBR400RR
€775.32
This set of bodywork comprises of the parts shown below which are also available separately
This kit is supplied with all additional fasteners required to mount it to a stock NC23. It fits to the original meter and supplied with a mirror stay. It uses the Honda mounting points and fasteners for mirrors. Where it mounts to the lower cowling and frame, it uses the original Honda bolts and clips (not supplied)