Cylinder set with piston, Aprilia RS250 – Suzuki RGV250
€679.33 €624.98
This cylinder kit is a direct replacement for the original (OEM) cylinder from Suzuki/Aprilia and this means it can be installed without making any changes to the engine crankcase. Same porting and all sizes the same.
TYGA no: P40001010001
SKU: alg-10440 Categories: ALL products, Aprilia, High performance, High performance, High performance, RG125, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Various parts, Various parts, Various partsCarbon tank grilles, Honda MSX125 GROM
€95.39
Carbon tank grilles to decorate your MSX125 Grom. Fits over nasty plastic stock items and transforms the appearance of your bike. Install with double sided tape provided or with silicone sealant for a really permanant intallation
TYGA no: BPCC-7128
SKU: MSX-10071 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopFuel Tap / Pet Cock, MC28
€103.58
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: 16950-KV3-953
SKU: hon-11272 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250 MC28, ShopCarbon rear hugger, Honda VTR1000 Sp2
€191.84
This stylish lightweight carbon hugger fits on the SP2 swing arm preventing rain and road dirt from reaching the rear suspension which can cause damage and corrosion. The hugger fits using only existing mounting points on the stock swing arm.
Please note that due to manufacturing tolerances between individual bikes, there is some difference in the exact mounting location from one bike to another. We recommend the use of silicone sealant as well as the fasteners provided to ensure a secure fit and prevention of damage to surface of swing arm.
This product is not suitable for the SP1 which uses a different shaped swing arm. See hugger BPCH-7120 for SP1 application
Beautiful, perfect fitment and give your bike that HRC look.
Athena cylinder set with piston (pair), set 3 Aprilia RS250 – Suzuki RGV250
€1,914.11 €1,646.15
This cylinder kit is a direct replacement for the original (OEM) cylinder from Suzuki/Aprilia and this means it can be installed without making any changes to the engine crankcase. Same porting and all sizes the same.
TYGA no: P40001010001
SKU: alg-10446 Categories: ALL products, Aprilia, High performance, High performance, High performance, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Various parts, Various parts, Various partsTank filler cap racing , KTM/Triumph
€69.87
Tank Filler Cap, Keyless, Racing Type, KTM/Triumph
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for most KTM/Triumph sportsbike models.
Suitable for the following models:
Triumph
– Triumph Daytona 600/650 All Years
– Triumph Daytona 675 2006 – 2008
– Triumph Daytona 955i 1998 – 2000
– Triumph Daytona T595 All Years
– Triumph Speed Four 2002 – 2006
– Triumph Speed Triple 1050 2005 – 2009
– Triumph Speed Triple 955i All Years
– Triumph Sprint 1050 2005 – Present
– Triumph Sprint GT All Years-
– Triumph Street Triple 2007 – 2008
– Triumph Street Triple 675 2007 – 2008
– Triumph Street Triple R 2007 – 2008
– Triumph Tiger 1050 2006 – Present
– Triumph Tiger 800 All Years
– Triumph Tiger 800XC All Years
– Triumph TT600 All Years
KTM
– KTM Super Duke 990/990R All Years
– KTM Adventure 950 S All Years
– KTM Adventure 990 S/R All Years
Triple Clamp Set, CNC Black, NSR250, MC28
€619.36
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform! They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation.
The top clamp has the ‘bolt-on’ ignition switch holder fitted, which can be removed for racing. The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1641
SKU: hon-10872 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC28Complete Bodykit set Type 10 Red, Honda MSX125 GROM
€329.98
Complete Bodywork Set, MSX125, Type 10, 2015 Valentine Red Scheme. Transform your bike! Easy and fun to install. With this product, you can afford to have a change of clothes for your beloved MSX125/Grom. Suitable for all models from 2013-2015
This set comprises of a complete set of all the OE Honda panels and decals shown in the photos below for the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets. These are all genuine Honda products and not nasty Chinese knockoffs!
TYGA no: BPFS-7028Y
SKU: MSX-10310 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop