TYGA bike dust cover Green/Black Ninja
€63.10
TYGA Indoor Bike Dust Cover, Black/Green, Ninja
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
Please contact us for your special requirements for custom-made dust covers or custom screen printing. Minimum order quantities apply.
TYGA no: TMER-0059
SKU: kaw-10127 Categories: ALL products, Bike covers, Kawasaki, Merchandise, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, Ninja 400R 2018-, Shop, Universal parts, Various parts, ZX10R 2011 -15, ZXR250CTYGA / Kitaco Power up kit maggot , Honda MSX125 GROM
€702.49 €632.24
TYGA/KITACO Power Up Kit, Maggot Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0042 Set, Pipe, Full Race System, MSX125 Grom, Mot Maggot
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA no: TPER-0097
SKU: MSX-10306 Categories: ALL products, Exhausts, Exhausts, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopWater Hose C, MC28
€12.31
Water Hose C, MC28
TYGA no: 19513-KV3-770
SKU: hon-11161 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Carbon engine covers right), KTM Duke – RC390
€120.42
Engine Cover, (Carbon), Right, KTM Duke – RC390
This engine protective cover is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.
Let your KTM RC stand out from the crowd this beautiful carbon product.
TYGA no: BPCC-7331R
SKU: ktm-10058 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 390, RC390 2022-, ShopBracket rear brake CNC black 84mm Brembo, Honda NSR250 MC21
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, black, MC21.
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1084)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-1084
SKU: hon-10406 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, ShopHandle bar clamp right ” hinge type” black, KTM RC390 2014 -23
€106.61
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1731R
SKU: ktm-10212 Categories: ALL products, CNC parts, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsInner Cowling, (Carbon), Stock Shape, RVF400, NC35
€189.63
Inner Cowling, (Carbon), Stock Shape, RVF400, NC35
Replace your stock plastic inner cowling with this trick looking carbon replacement. Installs in the same way as the stock one and retains fixing points for the radiator mesh.
TYGA no: bpcc-0038a
SKU: hon-10890 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopCarbon chain guard, Honda CBR1000 2004-7
€148.02
This is a high quality carbon direct replacement part for the cheap looking plastic item supplied by Honda
Update your bike with this great carbon product, direct replacement of the original part