Upper fairing street T10, NC30
€239.57
replacement upper cowling for BPFS-0090 and BPFS-0092
TYGA no: BPFU-9117
SKU: hon-10092 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Lower cowling original, NC30
€165.06
Street one piece lower cowling with open bottom as stock. Direct replacement for OEM Honda lower left, right and inner cowls. Can be used with most of our range of upper cowlings. See below
Compatible Parts:
NC30 and mid cowlings, Tyga upper cowlings: BPFU-0009, BPFU-0010, BPFU-0011, BPFU-0012, BPFU-0014, BPFU-0016, BPFU-0020
TYGA no: BPFL-0003
SKU: hon-10083 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Steering Stopper, NC35
€20.08
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for brake hose stay on triple clamp. Required when fitting BPFS-0013 and BPFS-0033
TYGA no: TPER-0018
SKU: hon-10831 Categories: ALL products, High performance, High performance, Honda, RVF400RR NC35Tyga Step Kit Replacement Right Side Hanger, (Adj.) CBR250R/CBR300R Assy.
€65.91
Tyga Step Kit Replacement Right Side Hanger, (Adj.) CBR250R/CBR300R Assy.
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts. Note this is for the adjustable type. See STAH-0018 for non adjustable fixed type.
Set, Pipe, Twin Exit System, High Level, MSX125 2021-, Stainless Oval/Carbon End Cap
€866.32
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
Bearing, Clutch Pressure Plate, MC28
€20.63
Bearing, Clutch Pressure Plate, MC28
TYGA no: 91007-KM7-702
SKU: hon-11080 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Top End Rebuild Kit MC18, Cyl. A, Assy.
€293.88
Below is everything you need to do a top end rebuild on your MC18. Suitable for cylinder ‘A’. One kit includes all parts for one cylinder. To overhaul both cylinders please order 2 kits.
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0002A
SKU: hon-10878 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC18Mirror blanking plate black, Honda VTR1000 SP2
€39.50
Handy mirror blanking plates for your VTR1000 SP2.
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
Mounting pitch is 40mm, so will fit many models.
2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can use your standard mirror mounting nuts to secure.