Frame In-fill panels (pair) GRP, RC36-2 RC30 style
€177.69
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPFC-7049
SKU: hon-11461 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistCarbon Front fender, Honda CBR1000 2004-7
€225.21
Carbon direct replacement for OEM Honda item. Pre drilled for easy fitting.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
Front Fender, Carbon, Stock Shape, VJ21
€190.60
Front Fender, Carbon, Stock Shape, VJ21
Real carbon fibre reproduction of the stock Suzuki RGV250 VJ21 front fender.
Finished in high gloss, adds beauty and reduces unsprung weight. (Weight of part approx. 0.26 kg)
TYGA no: BPCF-0019
SKU: suz-10127 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Fairing set street T10, NC35 kit
€746.54
Fairing set street T10, NC35 kit
This set of bodywork comprises of the parts shown in the picture which are also available separately
*A clear screen is provided.
This kit is supplied with all additional fasteners required to mount it to a stock NC35. It uses the original stock Honda mirrors but requires the special meter and mirror stays supplie
TYGA no: BPFS-0090
SKU: hon-10131 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopWater Hose, NSR250 MC21/28
€16.87
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: 19508-KV3-830
SKU: hon-11243 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsCarbon silencer guard (race) WSS300 race system, KTM RC390
€127.88
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCC-0047
SKU: ktm-10143 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsEngine stand, Aprilia RS250/Suzuki RGV250
€81.09
Engine stand for Aprilia RS-250 and RGV250, (VJ21 and VJ22 models).
No more chasing the engine around the bench as this stand allows for dual positioning so that whichever cylinder is being serviced is always easily accessible from the top.
Also rather handy for draining oil on a loose engine, or just neat storage.
Uses standard engine rubbers in engine mounts and is held in the stand with the standard engine mount bolts.
Zinc plated steel for corrosion resistance and good looks. A necessity for any RGV250 or RS250 engine builder!
TYGA no: TYTO-0029
SKU: alg-10124 Categories: ALL products, Aprilia, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Universal parts, Various parts, Various parts, Various partsCarbon airducts (pair) satin , Honda CBR250 MC22
€317.07
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPCX-7110satin
SKU: hon-11463 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, Silencers