Carbon under tank covers, Honda MSX125SF
€94.45
Carbon under tank covers, Honda MSX125SF
Fits over nasty plastic stock items and transforms the appearance of your bike.
Install with double sided tape provided or with silicone sealant for a really permanent installation
TYGA no: BPCC-7428
SKU: msx-10389 Categories: ALL products, Bodywork and carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020, ShopUpper Cowling (GRP), NX5 RS250R (1995 NSR250 Style)
€303.70
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Requires screen SCRE-0173
TYGA no: BPFU-9336
SKU: hon-10982 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopOil seal (8x16x5) cylinder, RGV250/RS250
€3.30
Tank filler cap “racing” (central fill hole type), KTM 7 hole
€69.87
<p><strong><span>Tank Filler Cap, Keyless, Racing Type, KTM, 7 Hole</span></strong></p>
<p><span>This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves</span></p>
<p><span>Supplied complete with seals and mounting hardware, it can be installed in minutes.</span></p>
<p><span>This product is suitable for KTM RC series sports bike models (RC125/200/250 and 390)</span></p>
<p><span>Fits all KTM RC models which are using the OEM filler cap with code: 90507008000 (2014-2016) but also may fit on later models using a 7 hole filler cap.</span></p>
<p><span>Suitable for the following models:</span></p>
<p><span>KTM</span></p>
<ul>
<li><span>KTM RC125</span></li>
<li><span>KTM RC200</span></li>
<li><span>KTM RC250</span></li>
<li><span>KTM RC390</span></li>
**** Please check photo 2 ****
</ul>
TYGA no: TYLY-0267
SKU: alg-10395 Categories: ALL products, CNC parts, CNC parts, KTM, RC 125/200, RC 390, Shop, Tank fillers, Various parts, Various partsCover headlight upper cowling (pair) paint, Honda VFR400 – RVF400
€35.34
Cover, (paint), pair, Headlight, Upper Cowling, Endurance
To be used on the TYGA Endurance Fairings for NC30/35
TYGA no: BPFC-9010paint
SKU: hon-10646 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, VFR400RR NC30Carbon stay R lower cowl, Honda CBR250RR MC22
€35.77
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPCC-7220
SKU: hon-11465 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersCarbon belly pan Honda MSX125 GROM
€329.63
Belly Pan, (Carbon), MSX125. Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
We also offer the same product with in GRP and GRP/carbon, see BPFL-7128 and BPCL-7228
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href="{{media url="wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf"}}" target="_self">Click here for PDF</a></p>
TYGA no: Â BPCL-7128
SKU: MSX-10193 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopFitting kit for Under cowl BPFL-7328 and BPCL-7328
€32.07
Fitting Kit for Lower Cowl BPFL-7428 and BPCL-7428
Complete replacement fitting kit for TYGA-Performance Lower Cowling for Honda MSX125SF/GROM
Suitable for BPFL-7428 (all colours) and BPCL-7428
Only sold as complete set.
TYGA no: TYBP-7428
SKU: msx-10464 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Shop, Various parts, Various parts