Upper cowling (GRP) stock shape RACE , Honda NSR250 MC18
€184.37
Upper Cowling (GRP), Stock Shape, Race, 1989, NSR250 MC18
Replacement Upper Fairing to be used with BPFL-9122 Lower Fairing.
Requires Screen: SCRE-0011 or SCRE-0012
For complete set with Lower, Upper and Screen order: BPFS-0174
TYGA no: BPFU-9222
SKU: hon-10919 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopSide cover right Red, Honda MSX125 GROM
€39.31
Side cover right Valentine Red, OEM Honda part
TYGA no: 83530-K26-900ZB
SKU: MSX-10118 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop2T blank plug, NSR250
€7.37
Replaces the 2T oil injector pump for pre mix use. Secure with liquid gasket such as Three Bond 1104. Must be used with TYLY-0015 Plug holder
Note for blocking the extra 2T feed on later model oil pumps.
On later engines (some MC21 and all MC28, there is an extra oil feed to the cases which can be observed when the oil pump is removed. HRC used to supply a little aluminium plug that you knocked into this extra hole to blank it off. However, that is discontinued so what to do depends on whether the conversion to pre-mix is permanent or not.
If permanant, then we recommend you make sure it’s all clean and degreased, and then fill the hole with epoxy steel. Allow it to cure and it’ll never leak.
If you’re not sure if you’ll ever go back to the oil pump, but would like the option, then we suggest covering the hole with a small thin disc of steel or plastic, and then using a RTV sealant to sort of glue that in place and also block it off. The RTV will stop any leaks, and the small disc will stop any RTV going down the hole. This is then soft enough to be cut away at a later date should you need to.
Compatible products:
TYLY-0015 Plug holder
TYGA no: TYLY-0012
SKU: hon-10388 Categories: ALL products, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various partsSeal, Countershaft, MC28
€13.35
Seal, Countershaft, MC28
TYGA no: 91204-MG3-003
SKU: hon-11108 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Lock washer crankshaft RGV250/RS250
€5.75
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Side fairing left RCV211, CBR400RR
€167.21
This is a replacement part for bodywork set BPFS-0019
Tyga Step Kit Replacement Link Rod, 110mm
€17.49
Tyga Step Kit Replacement Link Rod, Male, 110 mm.
Uses M6x1 thread in one end and M6x1 L/H thread in the other.
Carbon sprocket cover, KTM Duke125/200
€110.40
Sprocket Cover, (Carbon), KTM125 Duke and 200 Duke
This lightweight carbon sprocket cover weighs less than the stock one and adds style to your ride.
Please note, this product fits the following models
125 Duke
200 Duke
Let your KTM RC stand out from the crowd this beautiful carbon product.
KTM powerpart!
TYGA no: BPCC-7231
SKU: ktm-10025 Categories: ALL products, Bodywork and carbon, Carbon, Duke 125/200 2012- 16, KTM, Shop