Carbon race airbox MK1/MK2, Aprilia RS250
€451.00 €412.40
Carbon race airbox MK2, Aprilia RS250 (apr-10079)
Our race airbox is inspired by the GP road racing technology, taking advantage of a front air intake and all available space within the engine compartment.
And by using the lower part of the fuel tank as closing to increase the volumetric capacity of which becomes 9.5 lt against 6.2 lt of the standard component ( 53%).
The air intake (Snorkel) is positioned in the front to be able to suck a greater amount of air and with less turbulence than the positioning adopted in origin ( in the back)
Its shape also was designed using the calculation FEM (Finite Element Method) to minimize the load losses and therefore increase performance in the complete range of the RPM.
The kit also includes a carbon cover to be mounted close to the air intake to prevent suction of hot air.
All this is mainly reflected in an increase in engine performance, as shown below on the Dyno graph.
Greater maximum power ( 3 hp *)
Better throttle response
Higher max. RPM ( 500 rpm)
A GP “sound”
Improved access for maintenance
Jets #310 – #320(*)
Also be using Carbon you will have weight reduction of around 50% (465 grams compared to 970 grams OEM).
The filter is washable and gives better performance then original
The best aftermarket race airbox in the market, order with confidence.
* Standard engine
Please note, the rubber airbox manifolds are not with the airbox. You have the reuse the original ones.
TYGA no: 004800KT/P.
SKU: apr-10079 Categories: ALL products, Aprilia, Bodywork and carbon, High performance, High performance, RS250, ShopCarbon tankshields (pair), Suzuki GSX 1000 K7-K8
€254.88
This product replaces the cheap looking plastic panels which fit between the frame and the tank on the GSX-R1000 K7. This product comprises one left and one right panel which can be fitted in minutes. Front part held in place by Velcro provided.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
Water Hose, Fr. Head Out, MC28
€18.13
Water Hose, Fr. Head Out, MC28
TYGA no: 19508-KV3-830
SKU: hon-11162 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Carbon sprocket cover, Honda Monkey 125 2022 5 speed
€126.94
Rear Fender, Carbon, stock shape, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
IMPORTANT, Rear fender BPCH-7042 is not compatible with the Honda number
plate holder (part number 80100-KOF-T00 ) due to the weight of the Honda
part. We recommend when installing BPCH-7042 that TYGA registration holder
BPCK-7142 is installed instead
TYGA no: BPCX-7742
SKU: msx-10513 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopCarbon headlight surround, Honda MSX125 2021-
€162.86
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCX-7148
SKU: msx-10507 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopRacing stepkit adjustable (street), KTM RC390 2022-
€423.04
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: STAA-0037
SKU: ktm-10199 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsFairing set street RC211V, CBR400RR
€1,146.55
This set of bodywork comprises of the parts below which are also available separately.
*A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock NC29.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Please also look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
Racing step kit, Honda VFR750 (gen 4) 1994 -’97
€424.38
Racing Step Kit, Honda VFR750, Gen4 (1994-1997)
TYGA Performance racing step kit assembly. Designed in-house by TYGA Performance, these CNC machined step kits are made from top quality, aircraft grade aluminium. Features levers moving on ball bearings to give precise and smooth movement, and comes complete, ready to bolt on with stainless steel fasteners and all the required hardware.
Includes rear brake light provision, and retains the standard exhaust guard.
Carbon heel guards are included for both left and right hangers.
Peg position is 10 mm. up and 10 mm. back. Pitch of hanger to frame mounting holes is 78.6 mm.
TYGA no: STAA-0030
SKU: hon-11211 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97