Carb insulator, Honda NSR250 MC28
€373.11
Carb insulator, Honda NSR250 MC28
TYGA no: 16210-KV3-950
SKU: hon-10895 Categories: ALL products, Honda, NSR250, NSR250 MC28, Various partsCarbon swing arm cover, Suzuki RGV250 VJ22
€305.44
These lightweight carbon covers fit over the stock swing arm on the ‘banana arm’ swing armversion of the VJ22.
Very popular product, many swing arms have scratches, so with this beautiful carbon product you get rid of the scratches and also get that GP look.
Note, this product will not fit the later braced type swing arm
TYGA no: BPCC-9020
SKU: suz-10086 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, SuzukiKey holder CNC silver, Aprilia RS250
€78.51
Ignition Switch Holder, CNC Silver, Aprilia RS250
This is a removable ignition switch holder for our Aprilia RS250 top triple clamp. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps TYLY-1053.
TYGA no: TYLY-0153
SKU: apr-10014 Categories: ALL products, Aprilia, CNC parts, CNC parts, RS250, ShopSteering Stem Conversion Kit, NSR/RS
€128.69
This conversion kit includes the parts you need to convert the complete USD front end from a Honda RS250 NF5/NX5/NA5 to fit the NSR250 MC21/28.
Parts included:
Steering Stem
Top Clamp Collar
Top Nut (TYLY-0027)
Steering Stopper bushes and bolts
To fit the parts you will need to press the RS stem out of the RS lower clamp. Remove the clip from the bottom of the RS shaft and re-fit this to the conversion shaft. Then press back into the RS lower clamp.
The top clamp collar is a press fit into the top clamp, from the top side. this resizes the top clamp to fit the conversion shaft.
Headstock bearings are OEM NSR items, or TYGA taper roller. These must be purchased separately.
The final attack is fitting the steering stoppers. To locate these, loosly fit the converted headstock to the NSR and then turn your steering to left and right, marking the location of the steering stopper positions to give you just enough clearance for no interference with radiator etc. Check and double check position, then drill (dia. 6.8mm) and tap to M8. Use the supplied M8 bolts to secure.
You can now fit the rest of your front end with ease.
TYGA no: TPER-0027
SKU: hon-10836 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250, NSR250 MC21, NSR250 MC28, Stock list, all modelsUndertray (Carbon), NC35 RC211V Assy.
€104.82
This is the Carbon undertray used in the NC35 RC211V style seat cowling kit BPFS-0018.
This product is suitable as a replacement in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC35.
To be used with
seat cowling BPFT-9018
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: BPCT-9020
SKU: hon-10767 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Set pipe Full race system WSS300 (street), KTM RC390
€1,155.39
Set, Pipe, Full Race System, WSS300, (Street) KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0111
SKU: ktm-10146 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsThrottle Cable, Close, Ninja 250R 2008 -12
€12.40
Throttle Cable, Close, Ninja 250R 2008 -12
TYGA no: 54012-0294
SKU: kaw-10208 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopSet exhaust, half race with silencer, Kawasaki ER6
€392.82
The TYGA ER6 Race System has been designed with maximum power mind. No compromises have been made in the design and production of this exhaust. Manufactured from hand welded TIG welded stainless steel sections throughout, with the infamous Maggot ‘silencer’ secured by springs, for that ‘factory’ look and feel. The system fits both the ER6-N and the ER6-F. System is supplied with a lug for oxygen sensor.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only 1.5 kg, (compared to over 6 kg for stock) you are shaving valuable kgs off your bike.
The pipe set is supplied with Maggot silencer EXSL-2013 which is held in place by springs for ease of fitment and removal. This system WILL not comply to specific country noise emission regulations and is not homologated for street use. We strongly recommend the wearing of ear plugs when riding a motorcycle with this system installed. You have been warned!!
TYGA no: EXPS-0023
SKU: kaw-10012 Categories: 4 stroke exhaust sets, ALL products, ER6N-F 2009-11, Exhausts, Kawasaki, Shop