Carbon heel guards, Suzuki GSX 1000 K9-K11
€62.23
Pair of carbon fibre heel guards for the Suzuki GSXR1000 K9-K10.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
Set exhausts side by side stainless steel, Honda NSR250 MC18
€962.68
This would the best looking exhaust we ever made, and it performance to!
Tyga Performance is probably the only company offering stainless steel expansion chambers for the MC18. These exquisitely crafted pipes are designed to give maximum power, while at the same time to give sufficient clearance for the MC18 swing arm; quite a demanding feat but one achieved by the curving the header design. This system has the two silencers exiting, not unlike the 1989 MC18 stock system, in the high level left and right position and the silencer clamps are provided which mount onto the stock 1989 silencer mounting brackets.
For the 1988 MC18, this system can be installed but requires removal of the passenger footpeg hangers and replaced with special TYGA silencer brackets (not included in this set) So for 1988 owners, remember to order 2 x BPSY-0130
Parts included with this product:
1 x left side chamber, side by side (left exiting) stainless steel
1 x right side chamber, side by side (right exiting) stainless steel
2 x silencer single clamps and mounting bolts, washers and nuts
2 x manifolds
2 x mounting flanges
4 x mounting springs
1 x Radiator lower mounting stay
1 x lower cowling rear mounting stay
Not included are the silencers which you need to select from our choice of aluminium, carbon and carbon/Kevlar types. Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set.
TYGA no: EXCS-0003Â
SKU: hon-10357 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Honda, NSR250 MC18, ShopExhaust stay hanger (pair), Honda NSR250 MC18 (1988)
€35.22
This pair of stays replaces the stock rear passenger peg hangers and is required to mount the Tyga Exhaust system EXCS-0003 on the 1988 MC18. Not suitable or required for the 1989 version with the flip down passenger pegs.
TYGA no: BPSY-0130
SKU: hon-10415 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Honda, NSR250 MC18, ShopFront spacer wheel kit, fork conversion CBR600RR 05-06.
€36.64
Wheel, Front, Spacer Kit. ’05-’06 CBR600RR fork conversion.
These spacers are designed to allow the standard NSR250, NC30/35 front wheel to be used together with the ’05-’06 model CBR600RR forks when used with our CBR600RR triple clamp conversion.
Note that the upper/lower triple clamp bore dimensions are 48mm – 53mm.
The standard ’05-’06 axle shaft is too large a diameter to fit the NSR/NC wheel, so these spacer bushes are used to allow the use of the smaller axle shaft. The standard NSR250/NC30 shaft is a little too short, so we recommend using an RVF400 axle.
The NSR/NC disc mounting face is 100mm wide. The disc pitch, centerline to centerline of the rotors should be 138mm, and the discs 310mm in diameter.
RVF750R RC45 or NR750 discs can be used
TYGA no: TPER-0065
SKU: hon-10962 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various partsNGK plugcab for sparkplug R7282 Blue
€67.95
NGK sparkplug cab for sparkplug R7282 Blue (alg-10228)
NGK spark plug cap TRS1225 with 5 kohm resistor for NGK short race spark plug R7282. Suitable for 8 mm spark plug cable. Can be used f.e. for Honda NSR250 / RS and Aprilia RS250 / Suzuku RGV250 Yamaha TZ 125 and 250 road race engines.
You also need product alg-10227, picture below is a complete set.
TYGA no: TRS1225
SKU: alg-10228 Categories: ALL products, Aprilia, High performance, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RS250, ShopInner Cowling, (Carbon), Stock Shape, RVF400, NC35
€189.63
Inner Cowling, (Carbon), Stock Shape, RVF400, NC35
Replace your stock plastic inner cowling with this trick looking carbon replacement. Installs in the same way as the stock one and retains fixing points for the radiator mesh.
TYGA no: bpcc-0038a
SKU: hon-10890 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopCollar manifold, VFR750F gen 3 and 4, 90-97
€8.68
Collar manifold, VFR750F gen 4, 94-97
Collar manifold, VFR750F used on:
EXPS-0119 Set, Pipe, Full Race System, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
TYGA no: EXMN-0119
SKU: hon-11030 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97Handlebar Tube (Assy), Black
€22.89
Handlebar Tube (Assy), Black. Suitable for both left and right sides for CBR500R
Comes fitted with plastic bungs in each end.