Gasket cylinder 0,4 NF5
€12.29
Gasket, Cylinder, 0.4mm NF5
Fits MC16~28. Use to adjust deck height/squish/compression ratio.
TYGA no: 12191-NF5-610
SKU: hon-10413 Categories: ALL products, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopTank Cover Front (Race Carbon), NC35
€201.80
This tank cover replaces the stock one and blanks off the air duct holes. Designed to be used with our RC211V style upper cowlings, this product can also be used with stock bodywork with no air ducts if required
TYGA no: BPCX-9001
SKU: hon-10810 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Carbon, RVF400RR NC35Undertray street GRP GP-T, Honda NSR250 MC21/MC28
€75.27
Undertray, Street, (GRP), NSR250 GP-T
This product is to be used with BPFT-9033, BPFT-9133, BPCT-9033 and BPCT-9133 seat cowlings
Also to be used with BPFX-9133 Registration Plate Holder GP-T.
Note the following products are all compatible with the above seat cowlings and are interchangable between the MC21 and MC28
BPFX-9033 Undertray Street GRP
BPCX-9033 Undertray Street Carbon
BPFX-9333 Undertray Race GRP
BPCX-9333 Undertray Race Carbon
TYGA no: BPFX-9033
SKU: hon-10469 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopDB-killer for stainless exhaust 2 inch
€28.57
Decibel Killer, Silencer, Stainless, 2 Inch
This decibel killer is designed to reduce the noise from TYGA exhausts with 2 inch tail pipes. Suitable for the following models:
EXSL-0017 SUS Oval
EXSL-0040 Silencer, Aluminium, Round, 2 x 380 mm.
EXSL-0047 Silencer, Aluminium, Round, 2 x 450 mm.
It will also physically fit the following silencers, but it should not be used with any carbon silencer due to extreme heat buildup. If you like the designs below and would like the DB killer then please request that the silencer be made with stainless steel sleeve instead of carbon. We will advise on price (Stainles version of silencers below inclusive of db killer included will be less expensive than the carbon version excluding the db killer)
EXSL-0012
EXSL-0016
EXSL-0022
EXSL-0023
TYGA no: EXDK-0003
SKU: alg-10226 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30Carbon ignition cover, Yamaha R6 2006 – 12
€67.43
Ignition Cover (Carbon) 2006-12 Yamaha R6
TYGA no: BPCC-7302
SKU: yam-10010 Categories: ALL products, Carbon, Shop, Yamaha, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12Kit, Fairing Set, GRP, (Race) MC21, MC28, NSR250V
€610.53
Kit, Fairing Set, GRP, (Race) MC21, MC28, NSR250V
Modelled closely from the front fairing set taken off an actual NSR500V HRC factory machine, this kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but to allow it to fit the NSR250 with correct mounting points and clearances. This fairing set can be installed with both the MC28 and the MC21, (and possibly the MC18, though we have not tried that model).
The set consists of the parts shown below All special mounting hardware and windscreen is provided. Note, you do not need to change the meter stay for either the MC21 or MC28 models to install this fairing which bolts to the stock meter and rear frame spar side stay and lower stay locations with all hardware provided.
The fairing can be used with stock and all TYGA exhaust systems including use with the specially designed 250V exhaust system EXCS-0047
We recommend installing this fairing set with seat set BPFS-0198 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPFS-0197
SKU: hon-11056 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Silencer aluminium Classic “SHORTY” 60mm, 2 stroke stainless endcap
€76.12
Silencer, Shorty, Aluminium Classic, Two Stroke, Assy.
This shorty aluminium two stroke silencer has been designed for those owners of two stroke motorcycles looking for a more old fashioned classic look. They have similar dimensions and perform the same as our other two stroke silencers and are available with two different colour options for the exhaust exit cap and nozzle to suit the customers’ requirements.
Stainless steel pressed mounting end cap with 3 M6 threaded holes for mounting to exhaust chamber flange
Stainless steel exit end cap and long nozzle in traditional design with choice of raw stainless or black powder-coated finish
Cartridge glass wool insulation for greater longevity
Lightweight: weighs just 0.7kg
Tough anodised body finish for enhanced looks and weather resistance
Silencer is supplied with paper gasket and stainless steel bolts and washers.
“Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.”
Compatible Parts:
All Tyga Performance Two Stroke chamber sets. Remember to order enough silencers for one complete system!
Other Alternative Products:
EXSL-0001 Aluminium Classic
EXSL-9005 Aluminium Premium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
EXSL-0067 Shorty Aluminium Premium
EXSL-0065 Shorty Carbon
EXSL-0066 Shorty Carbon/Kevlar
TYGA no: EXSL-0002
SKU: alg-10369 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, ShopTail light cover, Aprilia RS250 Tyga
€17.20
This cover is made specifically for the TYGA bodywork kit (BPFS-0103). Fills in the light holes to make a smooth seat cowling for race use.
Not suitable for the stock bodywork
TYGA no: BPFX-9330Â
SKU: apr-10043 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, Shop