Fairing set street GP-T, Honda NSR250 MC21/MC28
€1,113.54
Kit, Fairing Set, GRP, (Street), NSR250 GP-T
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NSR250. As well as bringing the NSR250 up to date, it also offers huge weight saving and easy fitment and removal. Similar to a GP bike, the fairing is held on by R clips and nylon bungs for quick release. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays. The headlights used in this kit, are LED and consist of two units either side with 2 on low and 4 on high beam. The system uses a lot less current than conventional halogen systems while at the same time being discrete but stylish. Please note that the headlights do not comply with road use regulations and are unsuitable for high speed riding on unlit roads.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this fairing BPFS-0137 which is made using GRP (glass reinforced plastic) which is primed and ready for paint**, we offer a similar product using carbon fiber panels finished in high gloss UV protective clearcoat. See BPFS-0138
* A clear screen is provided unless you specify tinted in the comment box at check out.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0137
SKU: hon-10531 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopTemp gauge “race”, Honda 1/8″ NPT
€23.55
Temp Gauge, Race, Honda 1/8″ NPT
Stand alone temperature gauge for race use. Ideal for monitoring engine coolant temperature.
Pre-fitted with 1/8″ NPT adapter. Just remove the standard temperature sensor and screw in this replacement.
Displays temperature in Centigrade, up to 99.9C
Race use only. No back light function.
Supplied with 2x LR44 batteries (not fitted).
**NOTE** Some machines may use the temperature reading from the standard sensor, in which case alternative mounting may be required.
Fits:
RVF400 NC35
VFR400 NC30
NSR250 (All models)
NSR150SP
CBR400RR NC29
Also fits all Honda Motorcycles who are using thermo units with OE part numbers 37750-PC1-004 and 37750-KV3-951
TYGA no: TELC-0004
SKU: alg-10324 Categories: ALL products, By model, CBR400RR NC29, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Carbon silencer guard WSS300 race system, KTM RC390
€127.88
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCC-0076
SKU: ktm-10201 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsClutch Lever TYGA CNC flip up , KTM Duke – RC125/RC200/RC390
€54.27
Clutch Lever TYGA CNC flip up , KTM Duke – RC125/RC200/RC390
CNC machined from solid billet, these flip up type levers are made to a very high standard.
Not to much bling, and the orange color matches your KTM RC series good quality and adjustable in reach and length.
Fits’s in minutes and changes the appearance of your KTM!
TYGA no: LEVC-7003
SKU: ktm-10077 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 125/200, RC 390, RC390 2022-Upper cowling race ,KTM RC125/RC200/RC390
€150.56
Upper Cowling, Race (GRP), KTM RC125/200/390
This lightweight GRP upper cowling replaces both the heavy and brittle clear front cowling and the black plastic part underneath to save weight, add strength and make for easy assembly. A must for anyone racing the RC390!
Note this product requires windscreen model SCRE-0163 or SCRE-0164 to complete the race conversion
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFU-7131
SKU: ktm-10042 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390, ShopTYGA bike dust cover two tone Blue, Rothmans Honda
€65.05
TYGA Bike Dust Cover, Blue, Rothmans Honda
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: TMER-0115
SKU: alg-10322 Categories: ALL products, Bike covers, By model, Honda, Merchandise, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Carbon Lower Cowling, NX5 RS250R (late model style)
€521.68
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Requires screen SCRE-0173
TYGA no: BPCL-9036
SKU: hon-10952 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, Shop