Set pipe full race system WSS300 (no silencer), KTM RC390
€680.90
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0159
SKU: ktm-10197 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsFlywheel remover OEM Honda, Honda NSR125/150
€51.80
Genuine Honda tool for removing the flywheel.
TYGA no: TYTO-0007
SKU: hon-10330 Categories: ALL products, Honda, NSR150SP, Shop, Tools, Various partsCarbon Kit, Fairing Set, Honda NX5 RS250R (ram air)
€2,468.27
Kit, Fairing Set, Carbon, Honda NX5 RS250R (Ram Air)
Complete Carbon Bodywork kit which consists of the following products:
Upper Cowling Race, Carbon, NX5 RS250R (Late Model Style) (BPCU-9036)
The Carbon upper fairing is modelled off the last version of the NX5 RS250R but will fit any NX5 which has the ram air through the fuel tank system.
Lower Cowling, Carbon, NX5 RS250R (Late Model Style) (BPCL-9036)
The Carbon lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.
Seat Cowling Race, Carbon, NX5 RS250R (1995 NSR250 Style) (BPCT-9036(p))
Although the late model stock shape NX5 RS250R works well, to our eyes it is a bit lacking in lines and we prefer the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. We therefore decided to make a similar style seat cowling which would be a direct fit for the NX5. The seat cowling uses a lightweight aluminium stay to relocate the rear mounting bolts from the sides to the seat pad area and is covered underneath for streamlining and protection of the PGM and connectors.
Seat Support, Carbon, NX5 RS250R (BPCX-9036)
Screen Clear NX5 RS250R (Late Model Style) (SCRE-0168)
Made to order, takes approx 1 to 2 weeks to be ready for shipping
TYGA no: BPFS-0177
SKU: hon-10948 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopSpring powervalve, RGV250/RS250
€2.99
Cowling center white, Honda MSX125 GROM
€17.03
Cowling centre white, OEM Honda part
TYGA no: 77230-K26-900ZB
SKU: MSX-10095 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCarbon rear hugger, KTM Duke 125/200/390
€110.40
This rear hugger replaces the nasty plastic item, adds class to your ride and is an easy installation.
Update your bike with these beautiful carbon products, same shape as original. Fits in minutes.
TYGA no: BPCH-7031Â
SKU: ktm-10004 Categories: ALL products, Carbon, Duke 125/200 2012- 16, Duke 390 2012-16, KTM, ShopStep kit replacement left side mount assy, KTM RC125/200/390
€65.91
Tyga Step Kit Replacement Left Side Hanger Mount, (Adj.) KTM RC125/200/390 Assy.
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts.
TYGA no: STAH-0047A
SKU: ktm-10091 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390Bumb foam small,
€12.56
This foam seat bum stop is supplied with adhesive surface on back for easy and fast application. Adds the final touch to any race or race rep bike. This size is the smaller of the two versions we supply. See BPSP-0003 for larger version.
TYGA no: BPSP-0003
SKU: alg-10059 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30