Triple clamp set CNC black, Honda CBR250 MC22 -> CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 48 mm / 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks on the lower clamp, please change options below)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-1012 when installing this triple clamp set for best clearance issue with the CBR250RR clocks and fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1230
SKU: hon-11230 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersCarbon swing arm covers right, Suzuki RGV250 VJ22
€151.67
Clutch Cover, Carbon, RGV250 VJ21/VJ22
Carbon cover to replace the plastic stock one on the Suzuki RGV250 VJ21 and VJ22
TYGA no: BPCC-9020R
SKU: suz-10222 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiTYGA bike dust cover two tone red/black, Gilera
€65.05
TYGA Bike Dust Cover, Red/Black, DUCATI
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
Please contact us for your special requirements for custom-made dust covers or custom screen printing. Minimum order quantities apply.
TYGA no: TMER-0147
SKU: alg-10397 Categories: ALL products, Bike covers, By model, Merchandise, Shop, Universal partsComplete Bodykit set Type 1 Black, Honda MSX125 GROM
€329.98
Complete Bodywork Set, MSX125, Type 1 Asteroid Black metallic Scheme. Transform your bike! Easy and fun to install. With this product, you can afford to have a change of clothes for your beloved MSX125/Grom.
This set comprises of a complete set of all the OE Honda panels and decals shown in the photos below for the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets. These are all genuine Honda products and not nasty Chinese knockoffs!
All the products listed in this set are individually available. Click on the images below and it will take you to that product page.
TYGA no: BPFS-7028B
SKU: MSX-10110 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCarb Service Kit A, 47pieces, Kawasaki ZXR400
€90.08
Carb Service Kit A, 35 pieces, Kawasaki ZXR400
LiteTek Carburettor Seal Kit to suit: Kawasaki ZXR400
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-005 Float Bowl Ring, Material: Flourosilicone (OE part number: 92055-1426)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (OE part number: 92055-1002)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel (OE part number: 92055-1003)
4x OR-032 Float Valve O-Ring, Material: Viton 70A (OE part number: 92055-1425)
4x OR-030 Outside Fuel O-Ring, Material Viton 70A (OE part number: 92055-1004)
8x OR-031 Centre Fuel & Outside Breather O-Ring, Material: Viton 70A (OE part number: 92055-1223)
4x CS-004 Choke Plunger Cap, Material: HNBR (OE part number: 16012-1052)
3x SC-008 Throttle Synch Screws, Material Stainless Steel (OE part number: N/A)
TYGA no: CK-Kawasaki-ZXR400
SKU: alg-10345 Categories: ALL products, Carburettor Service Kits,, Kawasaki, ZXR400LRear shock Ohlins, Honda NSR250 MC21 MC28
€1,158.08
Developed and tested with TYGA Performance, this Ohlins rear shock is a must for any rider who is serious about improving the handling of the NSR250.
Adjustable for preload, rebound, compression and ride height, and made by the same people that provide suspension for the entire MotGP grid, this is a serious piece of kit. Looks great too!
Length is same as standard with 302 mm with 8 mm and -4 mm. of adjustment.
Spring rate 130 N (in comparison standard NSR spring is 120N)
Ohlins specification = S46HR1C1L
We recommend installation with TYGA Product BPSY-0135 reservoir support bracket.. The stock Honda reservoir support bracket can be used but the TYAG one gives extra support with two clamps.
This product is exclusive to TYGA Performance and TYGA Performance distributors and dealers worldwide. It is suitable for both the MC21 and MC28 models.
TYGA no: HO110013
SKU: hon-10482 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsPassenger seat cover Black/flad black, Honda MSX125 GROM
€187.90
Passenger Seat Cover, (GRP), MSX125 Grom.
This is the GRP version of our MSX125 passenger seat cowling in asteroid black with flat black number board as shown in the main photo. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPCX-7128 in carbon fibre. See website for more details.
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFX-7128 B/F
SKU: MSX-10147 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopLower Cowling (Carbon), NC30, GP-T, Assy.
€473.74
Lower Cowling (Carbon), NC30, GP-T, Assy.
This product is designed to be used with BPCU-9034 as part of the Bodywork set BPFS-0146
.
Designed in-house by TYGA Performance and using 15 years experience of developing fairings for the NC30, this fairing is lightest and most stylish yet. The design incorporates mounting points for the radiator mesh and other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is about 1 kg but strength retained using high strength epoxy resins and good design. See also GRP version BPFL-9034.
Compatible products:
This product must be used with BPCU-9034
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with race exhausts:
1. stock systems, fit with no spacing but care should be taken when installing to avoid any touching or proximity to exhaust and subsequent burning of the fairing.
2. Tyga exhaust can be installed with no modification
3. Other systems, we can not advise, but should require only spacing or possibly cutting area around where pipe exits near sidestand.