Indicator, Front, Left, Ninja 250R/300R 2013 -18
€44.37
Indicator, Front, Left, Ninja 250R/300R 2013 -18
TYGA no: 23040-0107
SKU: kaw-10168 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopHandlebar set 41 mm, black
€216.82
Designed and machined in house from aircraft grade aluminium, suitable for most sports bikes with 41 mm. right way up front suspension see chart below for examples.
7 degree angle for a comfortable, yet sporty feel.
BMW Strada
Honda CB-1 89-90
Honda CBR1000F 93-96
Honda CBR400 NC23/29
Honda CBR600F2
Honda CBR600F3
Honda Hawk 650 RC31
Honda NSR250 MC18/21/28
Honda VFR400 NC30
Honda VFR750 90-97
Honda VTR1000 98-02
Kawasaki EX650R 06-09
Kawasaki ZX10 88-90
Kawasaki ZX6E
Kawasaki ZX6R 95-97
Suzuki GSF400/600 Bandit
Suzuki GSXF600/750/1100 Katana
Suzuki GSXR750/1100 86-87
Suzuki RGV250 VJ21
Suzuki SV650 99-09
Yamaha FZR750
Yamaha YZF600 94-95
Please note that these bars may have clearance issues with components when used on street bike and are primarily sold for race use.
TYGA no: TYLY-1077
SKU: alg-10087 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, Shop, Various parts, VFR400RR NC30Front Fork Preload Adjusters blue/red (Pair), Honda CBR250/CBR300
€194.60
Front Fork Preload Adjusters, Pair, CBR250R/CBR300R
These fully functional preload adjusters replace the blank end caps on the stock CBR250R front suspension. These caps allow the rider to increase or reduce the amount of preload on the internal springs, which in turn, effectively increases or reduces the stiffness of the front forks allowing for a better set up for your riding style or conditions.
Also supplied are shorter preload spacers, which when fitted allow preload to be reduced (softer) from the stock setting by 3mm, and increased (stiffer) by 9mm, giving a total 12mm adjustment.
Supplied in red and blue anodised finish, these adjusters are as beautiful as they are functional
TYGA no: TYLY-0067
SKU: hon-10434 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, Honda, Shop, Universal parts, Various parts, Various partsCarbon key cover (pair), Yamaha V-max
€241.51
Weight approx. 0.110 kg. Includes both sides.
Replaces the stock cheap and fragile Yamaha ones
2T blank plug, NSR250
€7.37
Replaces the 2T oil injector pump for pre mix use. Secure with liquid gasket such as Three Bond 1104. Must be used with TYLY-0015 Plug holder
Note for blocking the extra 2T feed on later model oil pumps.
On later engines (some MC21 and all MC28, there is an extra oil feed to the cases which can be observed when the oil pump is removed. HRC used to supply a little aluminium plug that you knocked into this extra hole to blank it off. However, that is discontinued so what to do depends on whether the conversion to pre-mix is permanent or not.
If permanant, then we recommend you make sure it’s all clean and degreased, and then fill the hole with epoxy steel. Allow it to cure and it’ll never leak.
If you’re not sure if you’ll ever go back to the oil pump, but would like the option, then we suggest covering the hole with a small thin disc of steel or plastic, and then using a RTV sealant to sort of glue that in place and also block it off. The RTV will stop any leaks, and the small disc will stop any RTV going down the hole. This is then soft enough to be cut away at a later date should you need to.
Compatible products:
TYLY-0015 Plug holder
TYGA no: TYLY-0012
SKU: hon-10388 Categories: ALL products, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various partsCarbon sprocket cover, Aprilia RS125
€116.57
Attractive alternative to the stock sprocket cover and uses original mounting bolts.
Update your bike with this great carbon product, direct replacement of the original part
TYGA no: BPCC-7207
SKU: apr-10048 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS125, ShopExhaust Hanger, Aluminium, Ninja 400
€49.83
Exhaust Hanger, Aluminium, Ninja 400
Lightweight hand welded aluminium racing exhaust stay, this product is a direct replacement for stock passenger foot peg hanger and ideal for any race bike or custom project. The exhaust stay is supplied with a removable bracket to mount the rear brake reservoir.
Compatible with the following TYGA silencers and Slip-On sets:
EXSL-0071
EXSL-0072
EXPS-0100
EXPS-0101
TYGA no: TYLY-0213
SKU: kaw-10098 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Kawasaki, Ninja 400R 2018-Carbon shroud (pair), Honda MSX125 2021-
€451.95
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCX-7248
SKU: msx-10501 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, Shop