Lower cowling, Suzuki RGV 250 stock race , assy
€181.67
Lower Cowling (Race, GRP), VJ22, Stock Shape, Assy.
This lower cowling is modelled from the origial stock VJ22 shape and is suitable for all race classes but particulary those where the you need to keep the stock silhouette. Note that this panel splits the fairing into two parts in away to make it easy to remove at the race track. Constructed with epoxy resin and multi layer 200 gram mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!
It is to be used with BPFU-9226 upper cowling to complete the fairing. It has an enclosed belly pan for fluid retension to comply with racing classes where this is a requirement.
NOTE: This product is compatible with upper cowling BPFU-9226. Will not fit stock Suzuki upper cowling.
TYGA no: BPFL-9226
SKU: suz-10093 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiSilencer stainless round, WSS300 (race) system, KTM RC390
€406.03
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0109
SKU: ktm-10200 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsFront fender (GRP), NX6 NSR500V
€102.49
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Silicone Hose Kit, 6 pieces, Honda CBR250RR MC22
€139.72
Silicone Hose Kit, 6 pieces, Honda CBR250RR MC22
LiteTek Silicone Hose Kit, 6 pieces, to suit Honda CBR250RR MC22
3 ply polyester reinforced
Consist of the following hoses:
1x Hose A, Water Pump Inlet (OE part nr: 19501-KAZ-000)
1x Hose B Water Pump Outlet (OE part nr: 19061-KY1-000)
1x Hose C Radiator Inlet (OE part nr: 19502-KAZ-000)
1x Hose D Engine Outlet Left (OE part nr: 19066-KAZ-000)
1x Hose E Engine Outlet Right (OE part nr: 19068-KAZ-000)
1x Hose F Hose (OE part nr: 19521-KAZ-000)
TYGA no: SHK-001-Honda-MC22
SKU: alg-10358 Categories: ALL products, Carburettor Service Kits,, CBR250RR MC22, HondaClutch Pressure Plate, MC28 SP
€59.69
Clutch Pressure Plate, MC28 SP
TYGA no: 22351-KV3-780
SKU: hon-11151 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28TYGA bike dust cover Red/Black NSR
€63.10
TYGA Bike Dust Cover, Red/Black Honda NSR
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
See also TMER-0068 (TYGA Bike Dust Cover Blue/Black Honda NSR)
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
Please contact us for your special requirements for custom-made dust covers or custom screen printing. Minimum order quantities apply.
TYGA no: TMER-0085
SKU: hon-10929 Categories: ALL products, Bike covers, Honda, Merchandise, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Universal parts, Various parts, Various parts, Various parts, Various partsSide fairing right RC211V, CBR400RR
€167.21
This is a replacement part for bodywork set BPFS-0019
Lower Triple Clamp, CNC Black, RVF400 Forks, MC18 Shaft
€367.66
Lower Triple Clamp, CNC Black, RVF400 Forks, MC18 Shaft
CNC machined TYGA lower triple clamp for the NSR250 MC18 to take 52 mm diameter RVF400 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-371-010 & 53214-KA4-701
Bearings: 91015-KT8-005 & 91016-KT8-005
This product is also sold as part of a set
TYLY-1247 Triple Clamp Set, CNC Black, RVF400 Forks to fit MC18.
TYGA no: TYLY-1347
SKU: hon-10714 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all models