Decal, Tail Cowl Cover 250R Black, Ninja 250R 2008 -12
€2.17
Decal, Tail Cowl Cover 250R Black, Ninja 250R 2008 -12
TYGA no: 56054-0131
SKU: kaw-10227 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopAirbox GRP, A kit, Honda RS250 NX5
€480.84
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPFX-0008
SKU: hon-11312 Categories: ALL products, High performance, Honda, RS250R NF5 / NX5, Various partsWasher lock, many Honda
€7.39
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: 90505-425-830
SKU: hon-11274 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, ShopSection, Collector, Intermediate, Upper, Stainless, VFR750F, 3rd Gen, 90-93
€66.48
TYGA no: EXPT-6151
SKU: hon-11347 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Carb Service Kit A, 20 pieces, Honda CBR400RR NC29
€40.95
Carb Service Kit A, 20 pieces, Honda CBR400RR NC29
LiteTek Carburettor Seal Kit to suit
Honda CBR400RR NC29
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-012 Float Bowl Ring, Material: Flourosilicone, (Part of Honda Assembly Part No. 16010-MV4-780)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MV4-780)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MV4-780)
4x OR-006 Needle O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MV4-780)
TYGA no: CKA-Honda-NC29
SKU: alg-10356 Categories: ALL products, Carburettor Service Kits,, CBR400RR NC29, HondaCarbon lower cowling GP-T, Honda NSR250 MC21/MC28
€509.98
Lower Cowling (Carbon), NSR250 GP-T, Assy.
This product is designed to be used with BPCU-9033 as part of the Bodywork set BPFS-0138
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. Also available in GRP, see BPFL-9033
It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPCU-9033
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPCL-9033
SKU: hon-10541 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopTop Triple Clamp, CNC Black, NC35 RVF400
€196.92
Top Triple Clamp, CNC Black, NC35 RVF400
CNC machined TYGA top triple clamp with detachable key holder for your RVF400 NC35
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
This product can be bought as a set TYLY-1042 with detachable ignition switch holder TYLY-1142.
TYGA no: TYLY-1042(p)
SKU: hon-10783 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, Stock list, all modelsScreen Clear, Honda NX5 RS250R (late model style)
€52.00
Screen Clear, Honda NX5 RS250R
TYGA no: SCRE-0168
SKU: hon-10910 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, Shop