Fuel Tank, GRP, NSR250, MC28, Painted Rothmans
€1,304.96
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFG-9001Painted
SKU: hon-10971 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersCarbon silencer guard (street) WSS300 race system, KTM RC390
€127.88
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCC-0048
SKU: ktm-10153 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsKitaco camshaft type 2, Honda MSX125 GROM
€136.63
Developed specifically to increase the top end performance of your Honda MSX125 GROM.
KITACO Type 2 Camshaft
Direct replacement of the standard camshaft. Works with standard valves and valve springs.
This KITACO camshaft does not have the auto decompressor as used on the standard camshaft.
For those who want a Type 1 camshaft, please put this in the comment box at check out.
**Important** Must be used together with the KITACO i-Map Fuel Injection Controller (Map Setting #3). If used alone the engine will run lean and sustain damage.
TYGA no: 300-1432010
SKU: MSX-10308 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shoplower cowling stock shape, Honda RFV400 NC35
€161.36
Street one piece lower cowling with open bottom as stock. Direct replacement for OEM Honda lower left, right and inner cowls. Can be used with most of our range of upper cowlings.
TYGA no: BPFL-0103
SKU: hon-10709 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Carbon rear seat, Aprilia RS250
€773.53
This seat cowling is to be used in our Aprilia RS-250 kits, BPFS-1102.
This product is compatible with Sub frame TYLY-0065. Will not fit stock Aprilia subframe
TYGA no: BPCT-9030
SKU: apr-10071 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, ShopWasher, 6X12.5X2, MC28
€2.13
Washer, 6X12.5X2, MC28
TYGA no: 90437-GM0-000
SKU: hon-11127 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28RC Valve Cable B, NSR150SP
€11.81
RC Valve Cable B, NSR150SP
TYGA no: 14340-KW6-840
SKU: hon-11171 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR150SPcarbon rear hugger STD wheel, VFR400
€308.02
Rear Hugger (Carbon), VFR400R NC30, Assy.
New stylish design prevents water and road debris from the rear wheel reaching the rear shock and other components. Please note this model is designed specifically for the NC30 VFR400R with the stock 150/18 rear tyre fitment. Note we make similar products:
BPCH-7014, NC35 150/17 tyre size
BPCH-7024 NC35 160/17 tyre size
TYGA no: BPCH-7004
SKU: hon-10564 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30