Kit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)
€2,468.27
Kit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)
Complete Carbon Bodywork kit which consists of the following products:
Upper Cowling Race, Carbon, NX5 RS250R (Late Model Style) (BPCU-9036)
The Carbon upper fairing is modelled off the 1995 NSR250 racer but will fit any NX5 which has the ram air through the fuel tank system.
Lower Cowling, Carbon, NX5 RS250R (Late Model Style) (BPCL-9036)
The Carbon lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.
Seat Cowling Race, Carbon, NX5 RS250R (1995 NSR250 Style) (BPCT-9036(p))
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors.
Seat Support NX5 RS250R (BPCX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
Made to order, takes approx 1 to 2 weeks to be ready for shipping
TYGA no: BPFS-0189
SKU: hon-10977 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopBracket rear brake CNC black 84mm Brembo, Honda NSR250 MC21
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, black, MC21.
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1084)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-1084
SKU: hon-10406 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, ShopSet, Pipe, Slip On, Round Aluminium Silencer, Ninja 250
€253.47
Made in stainless steel with spring mounted aluminium silencer, this system significantly increases performance, saves weight and gives the best bang for the buck! (May not comply with noise regulations for some states and territories)
This system is supplied with a round aluminium silencer EXSL-0033
Seat Cowling (GRP), NX5 RS250R (early model style)
€290.93
Seat Cowling Race (GRP) NX5 RS250R (1993 Style) (BPFT-9236)
The seat cowling is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock subframe as far as we can tell. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Please see our range of NX5 bodywork section for sets that use this product and similar items.
TYGA no: BPFT-9236
SKU: hon-10941 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopFitting Kit for Tail Light, RC30
€43.88
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYBP-0297
SKU: hon-11519 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsStay, Comp, Upper Cowling, Ninja 250R/300R 2013 -18
€164.24
Stay, Comp, Upper Cowling, Ninja 250R/300R 2013 -18
TYGA no: 39137-0566-18R
SKU: kaw-10164 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopDash Indicator Bulb Harness, NC30/35
€17.20
This product plugs in line with the wiring connector that connects to the main harness from the left hand handlebar switch and allows the turn signal instrument warning light to function properly when LED turn signals and turn signal relay TELC-0002 are installed. Without this harness, the LED turn signals and turn signal instrument warning light will not flash properly. To install simply unplug the connector at the front of the bike near the master stay and install the TYGA mini harness in line.
TYGA no: TYWH-0002
SKU: hon-10756 Categories: ALL products, Honda, RVF400RR NC35, Various parts, Various parts, VFR400RR NC30Carbon heel guard left, VJ22/ NC30/NC35
€46.68
Replacement carbon heel guard for your TYGA Step Kit. Mounting hole pitch of 50mm may allow use on other machines.
TYGA no: BPCC-9003
SKU: alg-10045 Categories: ALL products, By model, Carbon, Hawk/Bros 400/650, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RVF400RR NC35, Shop, Suzuki, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30