Seat set street GRP GP-T, Honda VFR400 NC30
€1,096.34
The ultimate seat set for your V4 Honda!
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC30 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC30 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.
The kit is supplied with all mounting hardware including subframe and battery box. The taillight used in this kit, is LED and may not comply with road use regulations in some territories,( though we have not heard of any issues after selling them worldwide for ten years).
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this seat cowlng set BPFS-0149 which is made using GRP (glass reinforced plastic) which is primed and ready for paint
** we offer a similar product using carbon fiber panels finished in high gloss UV protective clearcoat. See BPFS-0151
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0148
SKU: hon-10583 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30Exhaust stay, Honda CBR250/CBR500
€50.22
This exhaust stay is designed to replace the rear foot peg hanger assembly and is a direct fit. Simply remove the stock hanger and replace with this lightweight elegant hanger and go racing! Fits the CBR250R, CBR300R and the CBR500 models.
TYGA no: TYLY-0074
SKU: hon-10310 Categories: 4 stroke exhaust sets, ALL products, CBR250R 2011 - 15, CBR300R 2014-, CBR500R, Exhausts, Exhausts, Exhausts, Honda, ShopSet pipe full race system WSS300 (no silencer), KTM RC390
€680.90
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0159
SKU: ktm-10197 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsCarbon clutch cover, Yamaha R6 2006-12
€132.87
Carbon clutch cover
TYGA no: BPCC-7209
SKU: yam-10017 Categories: ALL products, Carbon, Shop, Yamaha, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12Exhaustset stainless steel alum. silencer round, Kawasaki ZXR250
€506.31
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)This system is supplied with a round aluminium silencer EXSL-0033
Independent Review:TYGA Ninja 250R Race Exhaust System Dyno ResultsOctober 29th, 2010 Adam2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock ExhaustI’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!Ninja 250R Dyno results are for the following runs:Black: Stock Exhaust (no modifications whatsoever)Blue: Stock Exhaust (snorkel removed)Red: TYGA Round Aluminum Race System (snorkel removed)Note: Carbs were not jetted. Fuel mixture screws were not adjusted.HP Gains:1) Remove snorkel ( 1.5HP) == 28.1HP!2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!Total: 5.7HP ( 4.2HP from TYGA exhaust!)Weight Comparison (lbs):Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbsTYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbsWeight reduction: 8.6 lbs!** does not include mounting clamp or bolt* includes all hardware – ie: springs, bung plug, manifolds<iframe width= 560 height= 315 src= https://www.youtube.com/embed/z5hGKrpQ56c frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0018
SKU: kaw-10018 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopBrake lever replacement (up), universal 3 Tyga
€41.44
Replacement rear brake lever for your TYGA Step Kit. Complete with bearings.
TYGA no: STAL-0001Â
SKU: alg-10083 Categories: ALL products, Aprilia, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, KTM, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RS250, RVF400RR NC35, Shop, Suzuki, Various parts, VFR400RR NC30Carbon exhaust guard right, KTM RC390
€100.33
Exhaust Guard, Left, Carbon, KTM RC390 Serpent
This is not a simple cover, but a thick and very strong carbon part. Looks cool but also made to guard you, not getting burned by the silencers.
Carbon Exhaust guard for the TYGA serpent exhaust systems. This product is used to when the passenger footpeg assembly has been removed and a TYGA Performance underseat exhaust installed.
Compatible with the following TYGA exhaust systems:
EXPS-0061
EXPS-0062
TYGA no: BPCC-0021R
SKU: ktm-10062 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Exhausts, KTM, RC 390, ShopFairing stay side pair , Honda VFR400 NC30
€33.29
Fairing Stay, Side, Pair, VFR400R NC30, GP-T, Assy.
Made in stainless steel and designed specifically for the VFR400R NC30 GP-T fairing, these side stays fit to the frame in the same position as the stock Honda stays and allow for a little more adjustment. They are supplied with bushes so when the stays and bushes are used together, they provide the correct position for perfect fitment of the GP-T fairing. This product can also be used with any other race fairings or stock application.
TYGA no: BPSY-0189
SKU: hon-10586 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, VFR400RR NC30