Tankcover race front RVF, NC35
€49.73
This tank cover replaces the stock one and blanks off the air duct holes. Designed to be used with our RC211V style upper cowlings, this product can also be used with stock bodywork with no air ducts if required
TYGA no: BPFX-9001
SKU: hon-10141 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopSet, pipe full race system round carbon silencer LH exit, VFR750F gen 4, 94-97
€1,193.94
Set, pipe full race system round carbon silencer, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system can be used with a number of our 2″ slip on exhaust silencers
See also our sets with silencer included:
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand, however, the centre stand and pillion foot rests must be removed prior to installation.
TYGA no: EXPS-0125
SKU: hon-11018 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Lower Triple clamp CNC black, Suzuki RGV 250
€367.66
moet nog 1
TYGA no: TYLY-1346
SKU: suz-10052 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiBlank plug holder, NSR250
€7.37
Secures plugs TYLY-0012 and TYLY-0014. Secured to engine case using existing M6 hole
TYGA no: TYLY-0015
SKU: hon-10389 Categories: ALL products, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various partsCarbon passenger seat cover, Honda MSX125 GROM
€185.39
Passenger Seat Cover, (Carbon), MSX125 Grom.
This is the carbon version of our MSX125 passenger seat cowling. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPFX-7128 in a variety of colour options. See website for more details.
 
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
&nbsp;
&nbsp;
&nbsp;
&nbsp;
&nbsp;
TYGA no: BPCX-7128
SKU: MSX-10145 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopCarbon front fender, monster style satin, Honda MSX125 Grom 1st/2nd/3rd gen.
€192.39
Front Fender, (Carbon) Monster Style, MSX125 Grom. This Monster front fender looks much neater than the slab styled Honda part. Made in lightweight carbon fiber, it actually weighs half the stock plastic one and saves a whopping 200g! This fender is supplied in a satin finish. We also do a high gloss version, BPCF-7128g
TYGA no: BPCF-7128f
SKU: MSX-10070 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, ShopToe piece
€12.22
Replacement toe piece for your TYGA Step Kit.
Can also be used for fitting to almost any standard foot control lever to replace bent and damaged part by simply drilling a 6.3mm hole and countersinking on the back side of the lever.
Use Loctite to secure.
Comes with mounting bolt.
TYGA no: STAT-0001
SKU: alg-10042 Categories: ALL products, Aprilia, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, KTM, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC 125/200, RC 390, RGV250 VJ21, RGV250 VJ22, RS125, RS250, RS250R NF5 / NX5, RVF400RR NC35, Shop, Steps, Steps, Suzuki, Various parts, VFR400RR NC30Handlebar tube black, Ninja 400
€22.78
Handlebar Tube (Assy), Black, Ninja 400, Suitable for both left and right sides.
The Handle bar diameter is 7/8” (22.2mm).
Comes fitted with plastic bungs in each end.