Chain slider (set), Honda RVF400
€86.43
Chain Slider (set), RVF400, NC35
Replaces Honda part number 52170-MR8-0013
TYGA no: TYLY-0199
SKU: hon-10684 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, Various partsCarbon fuel tank MK2, Aprilia RS250
€1,225.57
Carbon fuel tank MK1, Aprilia RS250
Top quality reproduction of the Aprilia RS250 MK1 fuel tank.
Finished in high quality UV resistant clear-coat to show off the beauty of the carbon weave.
For the construction of this tank, all the innovation and technology were used, it’s made with a particular technique that allows us to use a single piece of carbon with significant aesthetic and structural advantages The internally there are several layers of Kevlar to increase impact resistance.
The internal surface is treated with a special coating made to our specifications to ensure the seal over time. The air vent is in anodized and made and design in house.
And as a finishing touch, the carbon frame bracket is also supplied with titanium fixing screws.
Not included:
– fuel cock
– stock mounting rubbers
– filler cap and seal
TYGA no: 0049TYGA
SKU: apr-10111 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopSeat Cowling, Undertray, Street, (GRP), Cup Style, KTM RC125, RC200. RC250, RC390
€90.32
Seat Cowling, Undertray, Street, (GRP), Cup Style, KTM RC125, RC200. RC250, RC390
This is a replacement part for set BPFS-0141. Please note that the following parts are required to complete the set:
BPFT-7331A Seat Cowling, Top
BPFT-7331B Undertray
BPSP-0007 Seat Pad
TYGA no: BPFT-7331B
SKU: ktm-10113 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390Carbon rear hugger/chain guard, CBR250RR 2017-
€280.14
TYGA Bike Dust Cover, Red, HRC (street)
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
See also TMER-0137 for the “Race” version of this TYGA bike dust cover for (race) bikes with no mirrors
Also available in Black see TMER-0123 and TMER-0124
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: BPCH-7044
SKU: hon-11072-1-1 Categories: ALL products, CBR250RR 2017, Honda, Merchandise, Shop, Universal partsTop triple clamp CNC black STREET, KTM RC390, 2014- 21
€486.77
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1831
SKU: ktm-10220 Categories: ALL products, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, Stock list, all modelsLower Triple Clamp, CNC Black, RVF400 Forks, MC18 Shaft
€367.66
Lower Triple Clamp, CNC Black, RVF400 Forks, MC18 Shaft
CNC machined TYGA lower triple clamp for the NSR250 MC18 to take 52 mm diameter RVF400 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-371-010 & 53214-KA4-701
Bearings: 91015-KT8-005 & 91016-KT8-005
This product is also sold as part of a set
TYLY-1247 Triple Clamp Set, CNC Black, RVF400 Forks to fit MC18.
TYGA no: TYLY-1347
SKU: hon-10714 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsUpper cowling stock race, Honda VFR400 NC30
€253.86
Upper Cowling (Race, GRP), NC30, Stock Shape, Assy
Stock shape, replaces the front upper as well as the two side inspection panels. Fits directly to stock or BPFL-0003 street and BPFL-0006 lowers.
Uses screens
SCRE-0036
SCRE-0037
SCRE-0039
SCRE-0040
SCRe-0143
TYGA no: BPFU-1021
SKU: hon-10544 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Carbon front fender, Honda CBR600 2007-16
€211.00
Carbon direct replacement for OEM Honda item. Pre drilled for easy fitting.
Please note TYGA logos are applied over the clearcoat and can easily be removed.