Carbon fairing set street GP-T, Honda NSR250 MC21/MC28
€1,780.94
Kit, Fairing Set, Carbon, (Street), NSR250 GP-T
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NSR250. As well as bringing the NSR250 up to date, it also offers huge weight saving and easy fitment and removal. Similar to a GP bike, the fairing is held on by R clips and nylon bungs for quick release. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays. The headlights used in this kit, are LED and consist of two units either side with 2 on low and 4 on high beam. The system uses a lot less current than conventional halogen systems while at the same time being discrete but stylish. Please note that the headlights do not comply with road use regulations and are unsuitable for high speed riding on unlit roads.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this fairing BPFS-0138 which is made using carbon fiber panels finished in high gloss UV protective clearcoat, we offer a similar product using GRP (glass reinforced plastic) which is primed and ready for paint**. See BPFS-0137
* A clear screen is provided unless you specify tinted in the comment box at check out.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0138
SKU: hon-10530 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon Rear hugger with chainguard, Suzuki RGV 250 VJ23
€216.82
Rear Hugger/Chain Guard (Carbon), VJ23 RGV250
The VJ23 RGV250 is the only RGV250 model which does not have a rear hugger as standard and as a result, all the road filth and rain tends to collect around the rear shock and under side of the seat cowling. TYGA Performance have developed this carbon hugger as a solution to the dirt issue while making the swing arm/rear wheel part of the bike more attractive. Designed to fit onto the contour of the VJ23 swing arm’s fabrication and lock into position by a rub underneath, the TYGA hugger incorporates the rear chain guard too, using the chain guard’s mounting holes on the left to hold it securely in place. On the right side, it is held on by a cable tie through the rear brake line guide and at the front by an M4 bolt which is requires drilling and tapping of the swing arm by the customer to install this product.
IMPORTANT, note that due to the VJ23 never having the option for a rear hugger, there is no position provided on the swing arm to mount the hugger at the front and it is necessary to drill and tap an M4 hole in the swing arm and use a cable tie to provide a good level of support for the hugger. See photos 7 and 8 for details on what is required to install this product.
Complete with all fitting hardware.
Tyga Step Kit Replacement Stay, Hanger
€11.25
This replacement part fits to the Tyga step kit hanger for Aprilia RS-125
Carbon exhaust guard set, Honda CBR250 2011
€195.42
This lightweight carbon exhaust guard set coprises of front and rear guard and replaces the ugly heavy stock item and will enhance the beauty of your CBR.
Not. Product can be supplied without badge if you prefer. Just state ‘no badge’ in the comment box when ordering and we will supply unbadged.
TYGA no: BPCC-0016A+B
SKU: hon-10311 Categories: ALL products, Bodywork and carbon, Carbon, CBR250R 2011 - 15, Honda, ShopSpring powervalve, RGV250/RS250
€2.99
TYGA step kit replacement left side Hanger, Hawk/Bros
€61.53
TYGA step kit replacement left side Hanger, Hawk/Bros
TYGA no: STAH-0013
SKU: hon-10926 Categories: ALL products, By model, Hawk/Bros 400/650, Honda, ShopCarbon tank box cover, KTM RC125/RC200/RC390
€399.92
Tank Cover, (Carbon), KTM RC125, RC200, RC390
This component replaces the nasty plastic item, adds class to your ride and is an easy installation. Note this product consists of just the rear part of the tank cover. This product can only be ordered with battery box cover BPCX-7431B as product BPCX7431 to save on price and shipping costs.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
TYGA no: BPCX-7431A
SKU: ktm-10033 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, KTM, RC 125/200, RC 390, ShopBracket rear brake CNC black 84mm Brembo, Honda NSR250 MC21
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, black, MC21.
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1084)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-1084
SKU: hon-10406 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, Shop