TYGA stepkit replacement brake Master cylinder holder plate, Ninja 400
€32.64
TYGA Step Kit Replacement Brake Master Cylinder Holder Plate, Ninja 400
Mikuni main jet # , Suzuki RGV250 /Aprilia RS250
€5.45
Mikuni main jet, Suzuki RGV250 / Aprilia RS250
Choose option below
TYGA no: alg-10106 - alg-10240
SKU: Mikuni 270 - 320 Categories: ALL products, Aprilia, By product, High performance, High performance, High performance, RGV250 VJ21, RGV250 VJ22, RS250, Suzuki, Various parts, Various parts, Various partsCarb Service Kit A, 47pieces, Kawasaki ZXR400
€90.08
Carb Service Kit A, 35 pieces, Kawasaki ZXR400
LiteTek Carburettor Seal Kit to suit: Kawasaki ZXR400
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-005 Float Bowl Ring, Material: Flourosilicone (OE part number: 92055-1426)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (OE part number: 92055-1002)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel (OE part number: 92055-1003)
4x OR-032 Float Valve O-Ring, Material: Viton 70A (OE part number: 92055-1425)
4x OR-030 Outside Fuel O-Ring, Material Viton 70A (OE part number: 92055-1004)
8x OR-031 Centre Fuel & Outside Breather O-Ring, Material: Viton 70A (OE part number: 92055-1223)
4x CS-004 Choke Plunger Cap, Material: HNBR (OE part number: 16012-1052)
3x SC-008 Throttle Synch Screws, Material Stainless Steel (OE part number: N/A)
TYGA no: CK-Kawasaki-ZXR400
SKU: alg-10345 Categories: ALL products, Carburettor Service Kits,, Kawasaki, ZXR400LSection, Right #2, KTM RC390 Serpent
€129.12
Section, Right #2, KTM RC390 Serpent
TYGA no: EXPT-0057
SKU: ktm-10119 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsTriple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, NC35 Forks to fit MC22
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3308
SKU: hon-11266 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersCarbon rear master break reservoir stay, RGV250 VJ21
€30.14
Rear Master Brake Reservoir Stay, Carbon, RGV250 VJ21
This lightweight corrosion proof carbon stay replaces the stock item that the bike is supplied with.
(Suzuki OE part nr: 69750-12C00-000).
TYGA no: BPCC-0060R
SKU: suz-10141 Categories: ALL products, Bodywork and carbon, RGV250 VJ21, Shop, Suzuki, Various partsHEL front brake line standard, Honda MSX125 GROM
€76.14
HEL front brake line standard, Honda MSX125 GROM (msx-10128)
Kit includes:
1x HEL Brake Line
4x Sealing Washer
2x M10x1.25 Banjo Bolt
45 degree banjo goes to master cylinder. 30 degree banjo goes to caliper.
Route the hose through the standard brake hose retaining clips.
TYGA no: BLSF-0009Â
SKU: MSX-10128 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsCarbon airbox lid, Honda NSR250 MC16/MC18
€232.17
Race Air Box Lid (Carbon) MC16, MC18
The stock air box is restricted by the size of the inlet holes on the lid which limits the amount of power that can be unleashed from the NSR250. By replacing the stock air box lid with the TYGA Performance version, the inlet to the air box is more than doubled in size and the flow improved by having one large trumpet.
This product is a direct replacement for the stock one and uses all the stock hardware. It even has groove so a perfect seal with the air box can be retained. A mesh is supplied in the air box to hold the stock air filter securely in position.
As well as potential power improvements over the stock air box, there is no denying it certainly looks a lot more trick than the Honda one too!
TYGA no: BPCX-9110
SKU: hon-10624 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR250 MC18, Shop