Section, Final, Rear, Twin Stack, Stainless, NC30/35
€101.51
Final tailpipe section (rear bank) for:
EXPS-0003 Set, Pipe, Twin Stack System, Carbon Silencers
EXPS-0005 Set, Pipe, Twin Stack System, Stainless Silencers.
TYGA no: EXPT-8002
SKU: hon-10852 Categories: ALL products, Exhausts, Exhausts, Exhausts, Stock list, all modelsSeat Pad, NSR250V
€67.02
Kit, Seat Set, GRP, (Street), MC21, MC28, NSR250V
Modelled closely from the seat cowling taken off an actual NSR500V HRC factory machine, this seat cowling kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but in proportion to the NSR250. This seat cowling set can be installed with both the MC28 and the MC21, (though to fit it on a MC21 you will need an MC28 fuel tank or TYGA Fuel tank BPCG-0001 or BPFG-0001). The set consists of the parts shown below and has a taillight for street use and special mounting hardware and seat pad provided.
We have designed the seat cowling so that for fuel tank removal, there is no need to remove the seat cowling, making for quick and easy jet changes and maintenance etc. Note, you do not need to change the subframe for either the MC21 or MC28 models to install this seat cowling which bolts to the stock subframe holes at the rear and special front lower subframe mounting positions with all hardware provided. The seat cowling has threaded holes in the underside to attach exhaust stays TYLY-0243L and TYLY-0243R for use with NSR250V exhaust system EXCS-0047
We recommend installing this seat cowling set with fairing set BPFS-0195 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPSP-0008
SKU: hon-11062 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Set pipe full race system WSS300 (no silencer), KTM RC390
€680.90
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0159
SKU: ktm-10197 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsFront fender (grp) stock shape, Honda RS250R NXA
€80.91
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Carbon swing arm covers right, Suzuki RGV250 VJ22
€151.67
Clutch Cover, Carbon, RGV250 VJ21/VJ22
Carbon cover to replace the plastic stock one on the Suzuki RGV250 VJ21 and VJ22
TYGA no: BPCC-9020R
SKU: suz-10222 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiFuel Tank, GRP, HONDA VFR750R RC30
€977.66
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
NGK sparkplug BR9ECMIX, Suzuki RGV250 / Aprilia RS250
€22.00 €18.87
NGK’s Standard Plugs are Constructed for Longer Life and Optimum Performance.
TYGA no: NGKBR9CMIX
SKU: alg-10166 Categories: ALL products, Aprilia, High performance, High performance, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Various partsCarbon airbox lid for race airbox, Aprilia RS250 Mk1/Mk2
€64.13
Carbon airbox lid for race airbox, Aprilia RS250 Mk1/Mk2
This airbox cover fits both Aprilia’s Mk1 and Mk2.
TYGA no: special030
SKU: apr-10098 Categories: ALL products, Aprilia, Bodykit replacement parts, High performance, High performance, RS250, Shop