This set of bodywork is designed to replace the stock seat cowling with the race version of our GP Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC21 but also an MC28 fitted with an MC21 fuel tank. The kit comprises of the parts below which are also available separately.

We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.

BPFS-0003 (street)

BPFS-0004 (race)

uses BPFT-9002 MC21 with carbon front section

BPFS-0059 (street)

BPFS-0060 (race)

uses BPFT-9102 MC21 all GRP construction

BPFS-0004 (street)

BPFS-0005 (race)

uses BPFT-9012 MC28 with carbon front section

BPFS-0045 (street)

BPFS-0046 (race)

uses BPFT-9112 MC28 all GRP construction

The advantages of this seat cowling over stock include:

– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent

– higher at the rear, to give the bike a more agressive stance

– better rider control by use of enclosed seat area

– improved strength with precision in design and fitment as well as lighter weight.

Coil, Suzuki RGV250 Aprilia/ RS250

Used but in good condition.

We have many spares for RS250 and RGV250, not all parts are online.

Just send us an email for availability.

*** no returns on used parts ***

TYGA Bike Dust Cover, Blue, Rothmans Honda

This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.

Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.

Bracket, Rear Brake, 84mm Brembo Conversion, Silver, MC28 and NC35. Consists of main caliper bracket and spacer for the rear disc brake to get the correct clearance.

This is to fit the 84mm pitch rear caliper.

Also available in black (TYLY-1089)

Applicable with the following Brembo model calipers:

Rear caliper P2

Code 20.6951.46

and

Rear CNC caliper P2

Code XA7.29B0

TYGA Bike Dust Cover, Blue/Black Honda NSR

This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.

See Also TMER-0085 (TYGA Bike Dust Cover Red/Black Honda NSR)

Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.

Please contact us for your special requirements for custom-made dust covers or custom screen printing. Minimum order quantities apply.

Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC21

CNC machined TYGA lower triple clamp for the MC21 NSR250 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.

The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.

Note, we recommend using Handlebar set 48 mm. TYLY-0012 when installing this triple clamp set for best clearance issue with the NSR fairing.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

CNC machined top triple clamp with detachable ignition switch/lock holder for your VFR400 NC30.

Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.

Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.

The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race us

CNC machined from solid billet, these flip up type levers are made to a very high standard and are adjustable for reach and length.

They look great on the bike, and also work perfect. Designed in house by TYGA Performance