Genuine Honda/HRC Workshop Apron, black

Frame Cover, Pair, Carbon, RGV250 VJ21

These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.

Note this set is for frames with a steering damper mounting boss 180mm measured from edge of the wiring hole.

Note that some examples of the VJ21 had no steering damper mounting boss, please order set BPCC-7121. Also some other frames have the steering damper mounting boss in a different position. For those frames, please order set BPCC-7121 for frames with no damper mounting boss and cut a hole to suit.

Shroud, L, Blu

Stay, Reg/Rec, Race, Ninja 400

Side cover right white, Honda MSX125 GROM (msx-10019)

OEM Honda part

Shroud left white, Honda MSX125GROM (msx-10017)

OEM Honda part

Silencer, Carbon, Round, 2" x 380 mm., Assy

This silencer has polished stainless steel endcaps and a carbon fiber tube to produce an attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.

The ‘slip-on’ mount is designed to fit any system with a 2" external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.

Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.

Developed and tested with TYGA Performance, this Ohlins rear shock is a must for any rider who is serious about improving the handling of the NSR250.

Adjustable for preload, rebound, compression and ride height, and made by the same people that provide suspension for the entire MotGP grid, this is a serious piece of kit. Looks great too!

Length is same as standard with 302 mm with 8 mm and -4 mm. of adjustment.

Spring rate 130 N (in comparison standard NSR spring is 120N)

Ohlins specification = S46HR1C1L

We recommend installation with TYGA Product BPSY-0135 reservoir support bracket.. The stock Honda reservoir support bracket can be used but the TYAG one gives extra support with two clamps.

This product is exclusive to TYGA Performance and TYGA Performance distributors and dealers worldwide. It is suitable for both the MC21 and MC28 models.