Carb Service Kit A, 40 pieces, Honda VFR750R RC36 (90-93)
€81.92
Carb Service Kit A, 40 pieces, Honda VFR750R RC36 (90-93)
LiteTek Carburettor Seal Kit to suit: Honda VFR750R RC36 (1990-1993)
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-025 Float Bowl Ring, Material: Flourosilicone (Part of Honda Kit No. 16010-MT4-000)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MT4-000)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MT4-000)
4x OR-040 Air Cut Seal, Material Viton 70A (Part of Honda Kit No. 16048-MM5-671)
4x OR-006 Needle O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MT4-000)
4x OR-018 Vacuum Breather O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MR7-004)
4x OR-011 Overflow O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MR7-004)
4x OR-012 Fuel Tee O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MR7-004)
4x CS-004 Choke Plunger Cap, Material: HNBR (Part of Honda assembly 16047-ML7-004 or 16047-MAJ-870)
Please check that your Honda uses the oval shaped air-cut ring, that is part of the Honda air cut valve assembly (part number 16048-MM5-671), to ensure that this is the correct kit for your motorcycle before proceeding with your purchase.
TYGA no: CKA-Honda-VFR750R-RC36 (90-93)
SKU: alg-10348 Categories: ALL products, Carburettor Service Kits,, Honda, VFR750F Gen 3 90-93Triple clamp set CNC black, Honda NSR250 MC28 to fit CBR600 fork
€602.26
Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC28
CNC machined TYGA lower triple clamp for the MC28 NSR250 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ingnition switch/ lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-0012 when installing this triple clamp set for best clearance issue with the NSR fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1941
SKU: hon-10558 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC28, ShopSeat set street GRP GP-T, Honda VFR400 NC30
€1,096.34
The ultimate seat set for your V4 Honda!
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC30 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC30 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.
The kit is supplied with all mounting hardware including subframe and battery box. The taillight used in this kit, is LED and may not comply with road use regulations in some territories,( though we have not heard of any issues after selling them worldwide for ten years).
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this seat cowlng set BPFS-0149 which is made using GRP (glass reinforced plastic) which is primed and ready for paint
** we offer a similar product using carbon fiber panels finished in high gloss UV protective clearcoat. See BPFS-0151
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0148
SKU: hon-10583 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30Triple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, CBR600RR Forks to fit MC18
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3303
SKU: hon-11247 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsExhaust Stay, MC18, GP-T, Left, Assy.
€68.35
Exhaust Stay, MC18, GP-T, Left, Assy.
This replacement exhaust stay is designed to be used with our GP-T kit for the MC18 and attaches to subframe TYLY-0183. Note this kit uses two stays, one for each side:
1 x TYLY-0198L for left
1 x TYLY-0198R for right
NSR250 1988 and 1989 MC18
TYGA no: TYLY-0198L
SKU: hon-10734 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, NSR250 MC18VHM piston (14mm piston pin) RS125 NF4 1987-’94 – RS250 NF5 1987-’92
€137.00
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: APHO12521717
SKU: alg-10401 Categories: ALL products, Honda, RS250R NF5 / NX5, Shop, Various parts, VHM productsKit, Fairing Set, Street, Single Seat, GRP, Stock Shape, VJ21
€681.48
Kit, Fairing Set, Street, Single Seat, GRP, Stock Shape, VJ21
Complete set of stock shaped bodywork for the Suzuki RGV250 VJ21
Consists of the following products ( also available seperatly)
BPFU-0019 Upper Fairing
BPFL-0019 Lower Fairing
BPFT-1019 Seat Cowling
BPFF-0019 Front Fender
SCRE-0120 Clear Screen
TYGA no: BPFS-0191
SKU: suz-10120 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Bodykit complete MiniRacerXtreme " REPSOL", Honda MSX125 GROM
€2,552.68
Bodywork Set, MRX, Painted Repsol
This bodywork set comprises of the exclusive TYGA Performance MRX body work as shown in the photos. Using special paint pigments to obtain the bright livery as on the factory MotoGP bikes, this kit is supplied with the graphics shown in the photos. By orderign the kit pre painted, it will save money and time over getting them painted locally. This kit can be fitted in day so there is no down time for your riding!
This kit will instantly transform your bike and make it unrecognisable from the way it looks today. The kit is supplied with all additonal mounting hardware including the meter stay, mirrors and headlight. Note turn signals, front fender, and tail tidy are not supplied with this kit but can be ordered from our website store. We can even paint for free a set of brand new wheels to match the orange if you order the wheel from our site. We also recommend the ultra sticky IRC tyres shown here which were developed especially for the MSX125 grom.
The quality of the paint is excellent but please remember for the most part, this is a handmade and hand painted product. This paintwork is done by our own highly experienced and skilled paint sprayer K Pong. He does all the paintwork for TYGA Performance including our project bikes you see on our website and he also does all our production parts. We wouldn’t trust anyone else!
Our MRX set only fits the first model MSX 2013-16
<iframe width="560" height="315" src="https://www.youtube.com/embed/8eiU-sMhpRI" frameborder="0" allowfullscreen></iframe>
TYGA no: BPFS-0127 RepsolÂ
SKU: MSX-10301 Categories: ALL products, Honda, MRX, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop