Carbon exhaust guard set, Honda CBR250 2011
€195.42
This lightweight carbon exhaust guard set coprises of front and rear guard and replaces the ugly heavy stock item and will enhance the beauty of your CBR.
Not. Product can be supplied without badge if you prefer. Just state ‘no badge’ in the comment box when ordering and we will supply unbadged.
TYGA no: BPCC-0016A+B
SKU: hon-10311 Categories: ALL products, Bodywork and carbon, Carbon, CBR250R 2011 - 15, Honda, ShopSet pipe Stainless full race system “no silencer”, Kawasaki ZXR400L
€644.67
Set, Pipe, Stainless, Full Race System (No Silencer), ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
In this set NO silencer is included please see EXPS-0138, EXPS-0139 and EXPS-0140 for systems with silencer
Athena gasket kit complete set, Suzuki RGV250 / Aprilia RS250
€59.00
Athena gasket kit complete set, Suzuki RGV250 / Aprilia RS250 (alg-10098)
TYGA no: P400510850255
SKU: alg-10098 Categories: ALL products, Aprilia, High performance, High performance, RGV250 VJ22, RS250, Shop, SuzukiCarbon front fender support, Honda Monkey 125 2018-
€124.31
Carbon front fender support, Honda Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCX-7542
SKU: msx-10431 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopSilencer stainless steel Motogp style (4 stroke) 35mm maggot
€194.80
Maggot silencer with 35 mm. inside inlet diameter. Same as MSX125 model but without mounting lug. Includes mounting clamp, springs and spring hooks to weld to existing system.
Tyga Moto Maggots are now available in five sizes, Mini, Midi, Moto, and Monster Mega Monster with inlet sizes of 35 mm., 43 mm., 50.8 mm., 54 mm and 64mm. respectively. As well as the basic five sizes, we have listed here some of the model specific Maggots which have lugs welded to them to suit their specific application. Of course, these can be mounted to other exhausts and offer an alternative to the basic Maggots.
All the silencers shown here are supplied with springs, spring hooks, and where applicable, mounting clamps.
 
<a title= maggot 35mm href= {{media url= wysiwyg/01-maggot-exsl-7013-35mm-6ed7668d.PDF }} target= _self >Click her for PDF</a>
TYGA no: EXSL-7013
SKU: alg-10113 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Shop, SilencersUpper cowling front race, Ninja 400
€154.72
Upper Cowling, Front (Race GRP), Ninja 400
Replacement Upper Cowling for TYGA Race Bodywork kit BPFS-0175
TYGA no: BPFU-7040
SKU: kaw-10140 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Section header stainless WSS300 race system, KTM RC390
€226.68
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPT-0077
SKU: ktm-10135 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsCarbon rear hugger, Honda VTR1000 Sp2
€191.84
This stylish lightweight carbon hugger fits on the SP2 swing arm preventing rain and road dirt from reaching the rear suspension which can cause damage and corrosion. The hugger fits using only existing mounting points on the stock swing arm.
Please note that due to manufacturing tolerances between individual bikes, there is some difference in the exact mounting location from one bike to another. We recommend the use of silicone sealant as well as the fasteners provided to ensure a secure fit and prevention of damage to surface of swing arm.
This product is not suitable for the SP1 which uses a different shaped swing arm. See hugger BPCH-7120 for SP1 application
Beautiful, perfect fitment and give your bike that HRC look.