Carbon tankcover, Suzuki GSX 1000 K7-K8
€196.77
Uses the original fixing points and Velcro provided to secure in place.
Carbon engine covers (pair) 2014- ’15, KTM Duke – RC390
€240.76
Carbon engine covers (pair) 2014- ’15, KTM Duke – RC390
This engine protective cover set is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.
Note on the left cover: This product does not fit the 2016 model KTM Duke – RC390 due to a revised design of the left side engine cover.
2014-2015 Model, Left engine case, KTM part number: 90230002133 (BPCC-7331L fits)
2016 Model, Left engine case, KTM part number: 93730002000 (BPCC-7331L does not fit)
Let your KTM RC stand out from the crowd this beautiful carbon product.
TYGA no: BPCC-7331
SKU: ktm-10056 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Duke 390 2012-16, KTM, RC 390, ShopStep adjuster plate, NSR250 MC21/MC8
€86.53
Adjustable Footpeg Hanger Plate (Pair), MC21/28. These CNC machined plates are designed to take the stock Honda hanger plates allowing for three additional positions higher and further back over the stock position. See photos below for before and after with the middle position fitment. Also note fitment of the two bushes supplied for the left side due to the left hanger positions top and bottom not being in the same vertical plane.
Ideal for trackdays and those weekend ‘toe dragging’ hoons!
Positions: Back 20mm. Up 10mm, 20mm & 30mm
Includes all fitting hardware and extended link rod.
TYGA no: STAA-0018
SKU: hon-10367 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC21, NSR250 MC28, ShopFuel hose (dia 8×13/1m)
€21.90
Mini LED turn signal lamps. Universal fitting. Bright but small and discrete, these units are easy to install requiring just one hole. Ideal for the finishing touch of any custom project. Please note that any LED turn signals draw a smaller current than most standard fitment ones and will need suitable flasher relay in order to flash at the correct speed.
TYGA no: 0900-991-90004
SKU: alg-10327 Categories: 848 / 1098 / 1198, ALL products, Aprilia, Cagiva, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR 2017, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Ducati, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, ER6N-F 2009-11, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, KSR110 2005- 10, KTM, Mito 125, Monkey 125 2018-, Monster, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, Ninja 400R 2018-, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, NSR500V, NSR500V NX6, RC 125/200, RC 390, RC36-2 -> RC30 replica products, RC390 2022-, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, RS250R NXA, RSV125, RVF400RR NC35, RVF750 RC45, Shop, Suzuki, TZR250 3MA, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, various parts, Various parts, Various parts, Various parts, various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VFR750R RC30, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3, Z125 2016-, ZX10R 2011 -15, ZXR250C, ZXR400LCarbon cover, temp Gauge 55,5mm, Honda
€25.10
Carbon cover, temp Gauge 55,5mm, Honda
This cover fits snuggly over the original plastic Honda gauge cover and adds a sporty appearance. It is also ideal for hiding any ugly scratches or dents that may have occurred over the years. Fits in second and can be held in place with a dab of glue or silicone adhesive.
This product is suitable for the following models:
MC21 NSR250
MC22 CBR250RR
NC29 CBR400RR
NC35 RVF400
SC28 CBR900RR
TYGA no: BPCC-0026
SKU: hon-10610 Categories: ALL products, Carbon, CBR250RR MC22, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR250 MC21, RVF400RR NC35, Shop, Various parts, Various partsSection secondary A stainless RH exit, VFR750F gen 4, 94-97
€105.03
Section, Secondary A, R.H Exit, VFR750F, Gen 4, ’94-’97
Used on: Right Hand Exit Full Race Systems, VFR750R, Gen 4
EXPS-0131 Set, Pipe, Full Race System, R.H Exit, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0134 Set, Pipe, R.H Exit, Full Race System, Oval Carbon/Carbon End Cap Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer, VFR750F, Gen 4, ’94-’97
TYGA no: EXPT-7119
SKU: hon-11036 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97VHM Cyl. Headset Husqvarna TC/TE 125 ’16 –
€271.95 €255.63
VHM Cyl. Headset Husqvarna TC/TE 125 ’16 -> (alg-10221)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This head set comes with following parts:
1x cylinder head
1x standard insert (11.60cc)
Optional inserts:
– blind
– 11.20
– 11.40
– 11.80
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Top triple clamp black set, CBR250 2011 –
€280.14
CNC machined top triple clamp with detachable ignition switch/lock holder for your CBR250R and 300R. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Fully functional steering lock.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp and key holder set offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
TYGA no: TYLY-1069
SKU: hon-10187 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, CNC parts, CNC parts, CNC parts, Honda, Shop