Triple clamp set CNC black, Honda CBR250 MC22 -> RVF400 fork
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1231
SKU: hon-11231 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersHandlebar set black, Honda CBR250 2011 – CBR300 2014
€222.93
Handlebar Set, Black, CBR250R/CBR300R.
This CNC machined handlebar set is designed to change the handlebars to be up to 25 mm. lower from the stock position giving a more sporting riding position. The ergonomics work very well with our step kit STAA-0013 putting more weight over the front end for better control, while putting the rider’s upper body lower behind the fairing for better areodynamics and less fatigue at high speed riding.
Designed to match our triple clamp (TYLY-0069 and TYLY-1069), these handlebars give the finishing touch to the cockpit area and are available in two colours, black or silver.
TYGA no: TYLY-1469
SKU: hon-10184 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, CNC parts, CNC parts, CNC parts, Honda, ShopUpper cowling (GRP) NX6, NSR500V
€299.78
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Carbon side cover (pair), Yamaha V-max
€228.97
Made to the same original shape as the Yamaha ones in high tech carbon, they weigh a fraction of the originals and are a great way to freshen up and individualise your V-Max
Set exhausts side by side stainless steel, Honda NSR250 MC18
€962.68
This would the best looking exhaust we ever made, and it performance to!
Tyga Performance is probably the only company offering stainless steel expansion chambers for the MC18. These exquisitely crafted pipes are designed to give maximum power, while at the same time to give sufficient clearance for the MC18 swing arm; quite a demanding feat but one achieved by the curving the header design. This system has the two silencers exiting, not unlike the 1989 MC18 stock system, in the high level left and right position and the silencer clamps are provided which mount onto the stock 1989 silencer mounting brackets.
For the 1988 MC18, this system can be installed but requires removal of the passenger footpeg hangers and replaced with special TYGA silencer brackets (not included in this set) So for 1988 owners, remember to order 2 x BPSY-0130
Parts included with this product:
1 x left side chamber, side by side (left exiting) stainless steel
1 x right side chamber, side by side (right exiting) stainless steel
2 x silencer single clamps and mounting bolts, washers and nuts
2 x manifolds
2 x mounting flanges
4 x mounting springs
1 x Radiator lower mounting stay
1 x lower cowling rear mounting stay
Not included are the silencers which you need to select from our choice of aluminium, carbon and carbon/Kevlar types. Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set.
TYGA no: EXCS-0003Â
SKU: hon-10357 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Honda, NSR250 MC18, ShopBar end weights red , Honda MSX125 GROM
€28.53
Handlebar End Weight, Red, Pair, MSX125 Grom
TYGA no: APK20A53102TA
SKU: MSX-10104 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsMirror blanking plate silver, Honda VTR1000 SP2
€39.50
Handy mirror blanking plates for your VTR1000 SP2.
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
Mounting pitch is 40mm, so will fit many models.
2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can use your standard mirror mounting nuts to secure.
TYGA bike dust cover Red/Black VFR750R
€63.10
TYGA bike dust cover Red/Black VFR750R
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
Please contact us for your special requirements for custom-made dust covers or custom screen printing. Minimum order quantities apply.
TYGA no: TMER-0067
SKU: hon-10930 Categories: ALL products, Bike covers, Merchandise, Shop, Universal parts, VFR750R RC30