Carb Service Kit 8 pieces, Suzuki RGV250/ Aprilia RS250
€39.26
set ( 4 pieces), complete CNC billet aluminium powervalves, RGV250/RS250 (alg-10123)
This set of Power valves is the latest version, and can be used for your Suzuki RGV250 or Aprilia RS250. Fully tested on Dyno and used on track and street bikes.
The set is made of CNC billet aluminium and is special coated.
No more problems with the “power valve pin” and having to buy new ones every 15.000 km.
And the risk that a broken power valve will ruin your engine!!
Now available for an unbeatable price, and FREE SHIPPING all over Europe.
TYGA no: CK-Suzuki-RGV250-89-96
SKU: alg-10123-1 Categories: ALL products, Aprilia, High performance, High performance, High performance, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Various parts, Various parts, Various partsSection, Final, Slash Cut Slip-On type, Stainless, R25/R3
€60.40
Section, Final, Slash Cut Slip-On type, Stainless, R25/R3
Used with exhaust system EXPS-0071
Carbon fairing side stay pair, Suzuki RGV250 VJ21/22
€70.24
Fairing Side Stay, Carbon, Set, RGV250 VJ21/VJ22
These fairing stays are direct replacements for the Suzuki OE part number 94522-12C-00-000 on the VJ21 and VJ22 RGV250.
TYGA no: BPCC-0061
SKU: suz-10140 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, RGV250 VJ21, RGV250 VJ22, Shop, Suzuki, Various parts, Various partsTriple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, NC35 Forks to fit MC22
€673.59
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3308
SKU: hon-11266 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersCarbon fuel tank, Honda NSR250 MC21
€1,444.49
Fuel Tank, Carbon, NSR250, MC21
Top quality reproduction of the steel MC21 fuel tank in carbon fiber. This product is a direct replacement for the stock MC21 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPCG-0004
SKU: hon-11194 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, ShopBelly pan (GRP/carbon) RED, Honda MSX125 GROM
€309.98
Belly Pan, (GRP/Carbon), MSX125, painted Valentine red to match your bike. Bling up your grom with this cool component.
Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
High quality mounting hardware provided and easy to install.
We also offer the same product with carbon, see BPFL-7128
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href="{{media url="wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf"}}" target="_self">Click here for PDF</a></p>
TYGA no: BPCL-7228 R
SKU: MSX-10192 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopCarbon lower cowling, Honda MSX125SF GROM
€523.53
Lower Cowling, (Carbon) MSX125SF, Grom, 2nd Gen 2016-2017
Lower Cowling, (Carbon), MSX125SF. Bling up your GROM with this cool component. High quality mounting hardware provided and easy to install.
This Lower Cowling is also available as BPFL-7428 in GRP ( unpainted and painted in Honda OEM colours to match your bike)
TYGA no: BPCL-7428
SKU: MSX-10386 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020Wheel Bearing Set, Rear MC18/21
€45.83
Replacement Rear wheel bearing. OEM quality assured
3x Bearings included
Also includes sprocket carrier bearing
TYGA no: TYPP-0010
SKU: hon-10834 Categories: ALL products, Honda, NSR250, NSR250 MC18, NSR250 MC21, Various parts, Various parts