Steering stoppers (pair) adjustable, Aprilia RS250
€34.64
CNC machined adjustable steering stoppers. These adjusters have the mounting hole positioned eccentrically to enable the piece to be rotated /- 2.5mm to find the optimum steering travel. Ideal for race bikes to limit the amount of steering available and prevent tank slappers and clearance issues with components.
TYGA no: TYLY-0076
SKU: apr-10059 Categories: ALL products, Aprilia, CNC parts, CNC parts, RS250, ShopCarbon front fender, KTM RC125/200/390
€200.66
This lightweight carbon front fender replaces the plastic item, reduces unsprung weight and is an easy installation.
Let your KTM RC stand out from the crowd this beautiful carbon product.
KTM powerpart!
Weights aprox. 300 grams
TYGA no: BPCF-7131
SKU: ktm-10024 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, KTM, RC 125/200, RC 390, ShopSeat set street Tyga doubleseat, NC30 kit
€748.25
Seat set street Tyga doubleseat, NC30 kit
Practicality
This seat cowling kit retains the stock NC30 sub frame and passenger seat so it is possible to carry a passenger as well as keep the luggage compartment. The kit re-uses the original Honda seat pads, locks and latch mechanism.
This kit is designed to give the NC30 a modern appearance while at the same time being a practical every day bike. The kit is supplied with all the mounting hardware and lighting and is straight forward to install with a stock machine as a starting point. Rear light LED.
The seat cowling keeps the tank in the stock position and the fuel cock is accessible.
Compatibility
This kit can be used with either stock Honda fairings or TYGA ones. If used with hon-10065 (as shown in the photos), some repositioning of the side stays is required because hon-10065 is designed for a slightly raised rear position on the fuel tank. For all other TYGA fairings, no modifications are required and the seat cowling kit can be installed without affecting the fairing.
This product is designed for the NC30. To use it with the NC35 is possible but it will require NC30 seats and some modification of the electrical component positions as well as stays for the front sub frame and tank mounting positions.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0078
SKU: hon-10067 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Mirror blanking plate silver, 30mm
€40.73
Handy mirror blanking plates for your 250/400 sportsbike.
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
Mounting pitch is 30mm, so will fit many models.
2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can use your standard mirror mounting nuts to secure.
TYGA no: TYLY-0056
SKU: alg-10127 Categories: ALL products, Honda, NSR250 MC21, NSR250 MC28, RGV250 VJ22, RVF400RR NC35, Shop, Suzuki, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Silencer aluminium premium SHORTY 60mm 2 stroke stainless endcap
€113.23
This shorty (55mm shorter than our other 2 stroke silencers) aluminium two stroke silencer offers the same excellent value for money that our silencers always have but now with improved build quality and precision
– CNC machined mounting end cap with 3 holes precision drilled for mounting to exhaust chamber flange
– stainless steel exit end cap and nozzle
– cartridge glass wool insulation for greater longevity
– lightweight: weighs just 0.6 kg
– tough anodised body finish for enhanced looks and weather resistance
– Silencer is designed with a built-in sealing ‘O’ ring and stainless steel bolts and washers are provided.
Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.
Compatible Parts:
All Tyga Performance Two Stroke chamber sets. Remember to order enough silencers for one complete system!
Other Alternative Products:
EXSL-0065 Shorty Carbon
EXSL-0066 Shorty Carbon/Kevlar
EXSL-9005 Aluminium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
TYGA no: EXSL-0067
SKU: alg-10257 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, ShopCarbon Front fender, Aprilia RS125 (2007-2010)
€208.08
This is a stock shaped fender for the 2007-2011 Aprilia RS-125 complete with mounting holes pre drilled for ease of fitment.
Weighs a fraction of the stock one at approx. 240g.
Let your bike stand out from the crowd with this beautiful carbon product
TYGA no: BPCF-7107
SKU: apr-10009 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS125, ShopSeat cowling assy, Honda NSR250 MC21
€216.63
We now make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. This product includes ONLY the seat cowling for replacement in the event of an accident or to use on a model other than the MC21 or MC28. For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
Tyga Performance Compatible Parts for this Product:
This product should be used with:
TYLY-0007 Subframe
TYLY-0006 Battery Box
BPSP-0001A Seat Pad
BPAC-0001 Rear Brake Reservoir Kit,
And also as well as the above on street versions:
BPLT-0008 LED Taillight
BPFX-9006 Registration Plate Holder
TYGA no: BPFT-9102
SKU: hon-10229 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, By model, Honda, NSR250 MC21, ShopFront fork overhaul kit, Honda MSX125 GROM
€55.41
Overhaul Kit, MSX125 Grom
Description:
Special fork disassembly / assembly tools for MSX125 Grom front forks.
31mm fork clamps with hole location will hold the fork stanchions securely, during overhaul.
14mm Hex wrench ideally cut to length to fit through the hole in the fork lowers to reach the socket head cap.
TYGA no: TYTO-0010
SKU: MSX-10326 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Tools, Various parts, Various parts