Boyesen Dual reeds, Cagiva Mito125
€48.76 €46.52
Boyesen Dual reeds, Cagiva Mito125
Boyesen Power Reeds use a patented dual-stage fiberglass design for more airflow, more air velocity and more overall power.
Boyesen dual-stage power reeds produce a better throttle response right off idle and through the mid-range when compared to the traditional Power Reed setup.
1 engine = 1 set
Top Triple clamp CNC silver, NC30
€218.46
CNC machined top triple clamp with detachable ignition switch/lock holder for your VFR400 NC30.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race us
TYGA no: TYLY-0044
SKU: hon-10113 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR400RR NC30NGK sparkplug R7282-10, short
€58.94
NGK sparkplug R7282-10, “short” (alg-10227)
The short version of the R7376 plugs if clearance is a problem. NOTE: NGK TRS1225 cap required.
Extreme Long Life Laser Iridium Plug, 14mm Thread, 19mm (3/4″) Reach, 13/16″ (20.6mm) Hex Size, Gasket Seat, Resistor, Solid Terminal, Iridium Tipped Fine Wire Center Electrode and Platinum Tipped Ground Electrode, .020″ (0.508mm) Gap.
NGK’s Standard Plugs are Constructed for Longer Life and Optimum Performance.
TYGA no: R7282-10
SKU: alg-10227 Categories: ALL products, Aprilia, High performance, High performance, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Various partsVHM Cyl. Headset Honda CR125 ’00-’04
€281.95 €265.17
VHM Cyl. Headset Honda CR125 ’00-’04 (alg-10210) AA33055
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (10.80cc) (2004 10.60)Optional inserts 2000 – 2003:– blind– 10.60– 10.80– 11.00– 11.20– 11.40– 11.60– 11.80Optional inserts 2004:– blind– 10.40– 10.60– 10.80This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33055
SKU: alg-10210 Categories: ALL products, Honda, Honda MX, Motocross, Shop, VHM productsStay oval silencer, Honda MSX125SF GROM
€20.41
Stay, Silencer, High Level Exhaust, MSX125
This product allows for the use of a TYGA Performance high level full race system with the 2016 second generation MSX125SF Grom. Some small modification to the rear fender is required to allow for installation, but once installed, the stay is neat and tidy and unobtrusive. This product is suitable for, and included with, the following model exhausts:
EXPS-0066 Set, Pipe, Full Race system, MSX125SF Grom, Carbon Oval/Carbon End Cap
EXPS-0067 Set, Pipe, Full Race system, MSX125SF Grom, Stainless Oval/Carbon End Cap
Note: This product can be ordered individually and used for customizing your bike with any high level exhaust. See also similar product BPSY-0175 which has the mounting holes further forward and is used with our Maggot full race system EXPS-0065.
TYGA no: BPSY-0177
SKU: MSX-10341 Categories: ALL products, Exhausts, Honda, MSX125SF 2016 -2020, ShopHeadlights TYGA Aprilia fairing
€155.90
This sleek integrated double headlight unit uses OSRAM 35/35 Halogen bulbs and modern reflector and refractor technology . Comes complete with loom and is ready to plug in. This is suitable for the TYGA Performance fairing BPFU-9030
TYGA no: BPLT-0021
SKU: apr-10077 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, ShopFairing stay side pair , Honda RVF400 NC35
€33.28
Fairing Stay, Side, Pair, RVF400 NC35, GP-T, Assy.
Made in stainless steel designed specifically for the RVF400 NC35 GP-T fairing, these side stays fit to the frame in the same position as the stock Honda stays and allow for a little more adjustment. They are supplied with bushes so when the stays and bushes are used together, they provide the correct position for perfect fitment of the GP-T fairing. This product can also be used with any other race fairings or stock application.
TYGA no: BPSY-0190
SKU: hon-10585 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Silencer oval carbon, Honda CBR500
€440.34
Silencer, Carbon, Oval/Carbon End Cap, 50.8 X 380 mm., CNC/Spring Mount, No Fittings.
The Dimensions of this silencer are as follows:
I.D. 50.8mm (slip-on section) O.D. 122mm x 90mm(diameter of stainless tube) L. 380mm Suitable for 300/500 cc medium capacity four stroke motorcycles.
TYGA no: EXSL-0043(p)
SKU: hon-10343 Categories: 4 stroke exhaust sets, ALL products, CBR500R, Exhausts, Honda, Shop, Silencers