Set full race system high level with maggot silencer, Honda MSX125SF GROM
€409.54
Set, Pipe, Full Race System, High Level, MSX125SF Grom, Moto Maggot. Second Generation.
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Total weight of the set is 2300 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043). Similar power would be expected with the Maggot system EXPS-0065
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0066 Carbon Oval High level System for 2016 MSX125SF second generation Grom
EXPS-0067 Stainless Oval High level System for 2016 MSX125SF second generation Grom
Note: Some modification of the stock Honda rear hugger (no modification required if using the hugger BPCH-7028 and BPCH-7128) and stock Honda rear fender is necessary to install this system
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/q4RjGB7doOM frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0065
SKU: MSX-10340 Categories: ALL products, Exhausts, Honda, MSX125SF 2016 -2020, ShopTankcover front RVF, NC35
€92.82
This is a GRP reproduction of the stock OEM front tank cover for the NC35. It can be used either with a stock tank in the normal way or if ordered with BPFX-9201 to make a full tank cover for the NC35.
TYGA no: BPFX-9101
SKU: hon-10143 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopBike cover Honda
€58.87
Genuine Honda Bike Cover, fitted with elastic for secure installation. I supplied with its own storage pouch.
TYGA no: 08P34-KPP-700
SKU: hon-10474 Categories: ALL products, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR500R, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Honda, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, PCX150, RS250R NF5 / NX5, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2Carbon rear hugger, Yamaha R1 2009-14
€133.29
Lightweight carbon fibre direct replacement for Yamaha OEM item. Predrilled for use with stock mounting hardware.
TYGA no: BPCH-7402
SKU: yam-10004 Categories: ALL products, Carbon, Shop, Yamaha, YZF-1000 R1 2009- 14Lower cowling Gp2010, Honda NSR250 MC21/MC28
€241.68
This product is almost identical to BPFL-9014, just wider lip to match the upper BPFU-9005.
Modelled on the RSW GP race bike design and adapted to fit the NSR250, this lower cowling represents the ultimate in fairing design for the NSR. Keeping the width to an absolute minimum, the design gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and improved design giving excellent finish both inside and out. Weight is now only approx. 1 kg but strength retained using a lip around the edge.
It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPFU-9005 but can also be used with BPFU-9012 and BPFU-9022.
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPFL-9114
SKU: hon-10237 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopKit complete body kit “street” with front fender GRP RC30 style, Honda VFR400 NC30
€1,073.55
This is the all GRP seat cowling used in the NC30 RC211V style seat cowling kits, BPFS-0028 and BPFS-0034.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: BPFS-0228
SKU: hon-11429 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30passengerseat Tyga cover, NC30
€55.20
This stylish seat cover replaces the passenger seat pad on the NC30 and is suitable for the seat cowling BPFT-9117 only. (For stock bosywork see BPFX-0021). Simply remove the original seat pad and replace with the cowling. Access to the luggage compartment is still retained.
For use with BPFT-9117 only. Not for use with stock seat cowling.
TYGA no: BPFX-9217
SKU: hon-10070 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Tyga Step Kit Replacement Foot Peg, Slotted, Black, Assy.
€42.34
Replacement foot peg for your TYGA Step Kit, slotted, black. Complete with M8x40 mm. taper socket bolt for mounting. We recommend securing with thread locking agent to resist vibration.