Set exhaust Gp style stainless steel, Honda NSR250 MC28
€769.95
Set exhausts side by side stainless steel, Honda NSR250 MC28
The ultimate exhaust set for your NSR250, beauty and performance!
Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
For more information on how to get the best power out of this system, combine it with other parts of our MC28 Power Up Kit (see under ‘technicical help’) to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike’s appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock footpeg hangers as well as work with our Tyga Performance step kit STAA-0002. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)
NEW! Our latest design, is provided with silencer clamping hardware which mounts directly to the stock right side MC28 silencer stay for a more secure and firm installation.
By selecting stainless steel for longevity and beauty, TYGA systems offer ubeatable value.
Please note this product fits MC28 only. For MC21, please select EXCS-0006A
This product, EXCS-0006B, has both chambers exiting on the right.
Parts included with this product:
1 x left side chamber, GP (right exiting) stainless steel
1 x right side chamber, (right exiting) stainless steel
1 x silencer double clamp and mounting bolt, washers and nut
2 x manifolds
2 x mounting flanges
4 x mounting springs
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set
TYGA no: EXCS-0006b
SKU: hon-10605 Categories: 2 stroke exhaust sets, ALL products, By model, Exhausts, Exhausts, Honda, NSR250 MC28, ShopTyga Step Kit Replacement Gear Shaft Clamp
€7.74
Tyga Step Kit Replacement Gear Shaft Clamp
Top triple clamp CNC black RACE, KTM RC390, 2022-
€442.15
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-2031
SKU: ktm-10216 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsCarbon front fender, Honda VTR1000 Sp1/Sp2
€220.62
High quality carbon fibre gloss finish replacement part that weighs a fraction of the original heavy plastic one. Saves on unsprung weight and enhances your bike’s appearance at the same time.
Beautiful, perfect fitment and give your bike that HRC look.
Gasket cylinder 0,4 NF5
€12.29
Gasket, Cylinder, 0.4mm NF5
Fits MC16~28. Use to adjust deck height/squish/compression ratio.
TYGA no: 12191-NF5-610
SKU: hon-10413 Categories: ALL products, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopHandle bar clamp left ” hinge type” black, KTM RC390 2014 -24
€106.61
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1731L
SKU: ktm-10213 Categories: ALL products, CNC parts, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsTriple clamp CNC black set, KTM RC125/RC200/RC390
€253.69
Top Triple Clamp Set, CNC Black, KTM RC Series
CNC machined top triple clamp with detachable ignition switch/lock holder for your KTM RC Series motorcycle
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition lock holder is positioned to allow use of the steering lock, but can be removed for race use.
Update your bike with this great TYGA performance, KTM power part!!
TYGA no: TYLY-1073
SKU: ktm-10072 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, ShopCarb Service Kit B, 19 pieces, Honda CBR400RR NC29
€31.32
Carb Service Kit B, 19 pieces, Honda CBR400RR NC29
LiteTek Carburettor Seal Kit to suit
Honda CBR400RR NC29
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x OR-019 Vacuum O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No.16040-MN4-003 superseded by 16040-MM5-601)
6x OR-016 Fuel O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-MN4-000)
4x OR-014 Float Breather O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No.16040-MN4-003 superseded by 16040-MM5-601)
4x CS-005 Choke PLunger Cap, Material: HNBR, (Part of Honda Assembly Part No. 16046-KT8-003)
3x SC-008 Throttle Synch Screws, Material: Stainless Steel
Please also see Honda CBR400RR NC29 Carb Service Kit A, 20 pieces.
TYGA no: CKB-Honda-NC29
SKU: alg-10355 Categories: ALL products, Carburettor Service Kits,, CBR400RR NC29, Honda