Lower Triple Clamp, CNC Black, RVF400 forks/NSR shaft
€367.66
CNC machined TYGA lower triple clamp for your NSR250 to take RVF400 NC35 forks.
Designed and machined in house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-371-010 & 53214-KA4-701
Bearings: 91015-KT8-005 & 91016-KT8-005
This product is also sold as part of a set:
TYLY-1541Triple Clamp Set, CNC Black, NC35 Forks to fit MC21
TYLY-1741Triple Clamp Set, CNC Black, NC35 Forks to fit MC28
Silencer stainless steel round 86mm (4 stroke) 38,1mm
€259.22
This silencer has polished stainless steel endcaps and a stainless tube to produce an attractive and lightweight product. It is held to the pipe set using springs for easy fitment and removal. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
Supplied with silencer clamp and fitting hardware.
The Dimensions of this silencer are as follows:
I.D. 38.1mm (slip-on section) O.D. 86mm (diameter of carbon tube) L. 400mm Suitable for small capacity four stroke motorcycles such as Honda CBR125/150, Honda Innouvo etc.
TYGA no: exsl-0019
SKU: alg-10111 Categories: 4 stroke exhaust sets, ALL products, By model, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, Exhausts, Honda, Shop, SilencersNumber board miniRacerXtreme, Honda MSX125 GROM
€32.64
Number Board, (GRP) MiniRacerXtreme, MSX125 Grom
This product fits over the front of the fairing on the MiniRacerXtreme to transform the fairing from street to race. Easy installation and can be used with or wothout the headlight installed
Carbon exhaust guard left, KTM RC390
€100.33
Exhaust Guard, Left, Carbon, KTM RC390 Serpent
This is not a simple cover, but a thick and very strong carbon part. Looks cool but also made to guard you, not getting burned by the silencers.
Carbon Exhaust guard for the TYGA serpent exhaust systems. This product is used to when the passenger footpeg assembly has been removed and a TYGA Performance underseat exhaust installed.
Compatible with the following TYGA exhaust systems:
EXPS-0061
EXPS-0062
TYGA no: BPCC-0021L
SKU: ktm-10061 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Exhausts, KTM, RC 390, ShopSeat cowling assy, Honda NSR250 MC21
€216.63
We now make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. This product includes ONLY the seat cowling for replacement in the event of an accident or to use on a model other than the MC21 or MC28. For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
Tyga Performance Compatible Parts for this Product:
This product should be used with:
TYLY-0007 Subframe
TYLY-0006 Battery Box
BPSP-0001A Seat Pad
BPAC-0001 Rear Brake Reservoir Kit,
And also as well as the above on street versions:
BPLT-0008 LED Taillight
BPFX-9006 Registration Plate Holder
TYGA no: BPFT-9102
SKU: hon-10229 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, By model, Honda, NSR250 MC21, ShopBolt, front brake rotor mounting, Honda
€2.38
Front brake mounting bolt. Bolt, M6 thread with a dome head and 6 mm. Allen key fitting
Replace those nasty corroded bolts with these Honda OEM shiny new ones, your bike deserves it! Suitable for most Honda models including:
CBR250R
MC18
MC21
MC22
MC28
NC23
NC30
NC35
RC30
RC40
RC45
etc.
TYGA no: 90106-KGH-600
SKU: hon-10500 Categories: ALL products, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RS250R NF5 / NX5, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2Tankcover race front RVF, NC35
€49.73
This tank cover replaces the stock one and blanks off the air duct holes. Designed to be used with our RC211V style upper cowlings, this product can also be used with stock bodywork with no air ducts if required
TYGA no: BPFX-9001
SKU: hon-10141 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopBracket, Right Footrest, Ninja 250R 2008 -12
€70.62
Bracket, Right Footrest, Ninja 250R 2008 -12
TYGA no: 35063-0386-18R
SKU: kaw-10211 Categories: ALL products, Kawasaki, Ninja 250R 2008- 12, Shop